The Paton Welding Journal, 2006, №02

2006 №02 (12)

2006 №02 (02)

---

The Paton Welding Journal, 2006, #2, 2-5 pages

Laser-microplasma alloying and coating of steel

V.D. Shelyagin, V.Yu. Khaskin, Yu.N. Pereverzev

E.O. Paton Electric Welding Institute of the NASU. 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine.

Abstract
The hybrid process is suggested for laser-microplasma alloying and coating. The process is free from drawbacks of laser cladding and microplasma spraying. Main parameters, characteristic structure of the transition zone and distribution of microhardness were determined.
Keywords: laser cladding, microplasma spraying, powder materials, adhesion strength, surface preparation, combined coating, microplasmatron, microcracks, process parameters, structures

References

1. Grigoriants, A.G. (1989) Principles of laser treatment of materials. Moscow: Mashinostroenie.
2. Sasaki, S., Shimura, H., Kawakami, Y. et al. (1995) Laser assisted plasma spray coating method for surface modification of tribo-materials. In: Proc. of ITSC’95 (Kobe, Japan, May 1995). Vol. 1.
3. Zreris, R., Nowotny, S., Berger, L.-M. et al. (2003) Characterization of coatings deposited by laser-assisted atmospheric plasma spraying. In: Proc. of ITSC’03 (Orlando, USA, 2003).
4. Coddet, C., Montaron, G., Marchione, T. et al. (1998) Surface preparation and thermal spray in a single step: the PROTAL process. In: Proc. of 15th ITSC (Nice, France, 1998). Vol. 2.
5. Borisov, Yu.S., Kharlamov, Yu.A., Sidorenko, S.L. et al. (1987) Thermal spraying using powder materials. Refer. Book. Kiev: Naukova Dumka.
6. Bogachek, V.L., Tsybina, L.N. (1988) Quality of coatings deposited by microplasma spraying. Avtomatich. Svarka, 8, 58–60.
7. Borisov, Yu.S., Pereverzev, Yu.N., Vojnarovich, S.G. et al. (1999) Deposition of narrow-strip coatings by microplasma spraying method. Ibid., 6, 53–55.
8. Khaskin, V.Yu., Velichko, O.A. (1994) Bond strength between laser clad layer and substrate metal. Ibid., 7/8, 51–52.
9. Velichko, O.A., Avramchenko, P.F., Molchan, I.V. et al. (1990) Laser cladding of cylindrical parts by powder materials. Ibid., 1, 59–65.
10. Grezev, A.N., Safonov, A.N. (1986) Cracking and microstructure of chrome-nickel alloys clad by laser. Svarochn. Proizvodstvo, 3, 6–8.
11. Morozov, V.P., Misyurov, A.I., Grigoriants, A.G. et al. (1987) Analysis of conditions of crack formation in laser cladding of Ni-Cr-B-Si system powders. Ibid., 5, 32–35.
12. Kovalenko, V., Haskin, V. (1995) Selection of self-fluxing powder materials for laser cladding. Informatyzatsiya ta Novi Tekhnologii, 1, 36–39.
13. Majorov, V.S., Matrosov, M.P. (1989) Influence of surface active materials on hydrodynamics of laser alloying of metals. Kvant. Elektronika, 4, 806–810.
14. Garashchuk, V.P., Shelyagin, V.D., Nazarenko, O.K. et al. (1997) Technological 10 kW CO2-laser LT 104. Avtomatich. Svarka, 1, 36–39.

---

Suggested Citation

V.D. Shelyagin, V.Yu. Khaskin, Yu.N. Pereverzev (2006) Laser-microplasma alloying and coating of steel. The Paton Welding J., 02, 2-5.

---