| 2025 №02 (04) |
DOI of Article 10.37434/tdnk2025.02.05 |
2025 №02 (06) |
"Tekhnichna Diahnostyka ta Neruinivnyi Kontrol" (Technical Diagnostics and Non-Destructive Testing) #2, 2025, pp. 30-35
Automated control system for the technological process of asphalt concrete coating laying
Y.V. Steshenko, A.G. Protasov
National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute». 37 Beresteysky Ave., 03056, Kyiv, Ukraine. E-mail: yaroslav.steshik@gmail.com, a.g.protasov@gmail.comThe article considers the issue of developing closed-loop automated process control systems for laying asphalt concrete coating. Closed-loop systems that provide feedback between the control and execution stages are a key element of modern automation of technological processes. Their use allows to improve the quality of asphalt concrete coating, optimize resource consumption and ensure compliance of finished products with regulatory requirements. The main result of the study is the development of a structural diagram of a closed-loop process control system, which is built on the principle of operational control and regulation of technological parameters in the process of laying asphalt mixture. This makes it possible to adapt the processes of compaction and heating of asphalt concrete to changing external factors. The influence of the main technological parameters on the coating quality has been determined, and methods for automated adjustment of the compaction intensity depending on temperature indicators have been proposed. The computer modeling of the real-time data collection module operation has made it possible to visualize the received signals for their further analysis and use. The modeling results confirmed the possibility of automating the technological process of laying asphalt concrete coating. The proposed system is capable of achieving a significant increase in the efficiency and cost-effectiveness of technological processes, which is relevant in the modern road construction complex. 12 Ref., 4 Fig.
Keywords: technological process control system, thermography, automation, asphalt concrete, temperature control
Received: 10.04.25
Received in revised form: 21.04.25
Accepted: 13.05.25
References
1. Protasov, A.G., Storozhyk, D.V. (2023) Technologies for automation of road surface diagnostics. Vcheni Zapysky TNU, Vol. 34(73), 2, 219–227 [in Ukrainian]. DOI: https://doi.org/10.32782/2663-5941/2023.2.1/35.2. Storozhyk, D.V., Protasov, A.G. (2024) Automated road surface diagnostic system with image complexing. Tekh. Diahnost. ta Neruiniv. Kontrol, 3, 39–44 [in Ukrainian]. DOI: https://doi.org/10.37434/tdnk2024.03.06
3. Jin, X., Jiang, Q., Yao, S. et al. (2017) A survey of infrared and visual image fusion methods. Infrared Physics & Technology, 85, 478–501. DOI: https://doi.org/10.1016/j.infrared.2017.07.010
4. Paramanandham, N., Rajendiran, K. (2018) Multi sensor image fusion for surveillance applications using hybrid image fusion algorithm. Multimedia Tools and Applications, 77(10), 12405–12436. DOI: https://doi.org/10.1007/s11042-017-4895-3
5. Chen, Z., Zhang, Y., Luo, Y., Wang, Z. et al. (2021) Roadatlas: intelligent platform for automated road defect detection and asset management. ATM Multimedia Asia, 1–3. DOI: https://doi.org/10.48550/arXiv.2109.03385.
6. Yusof, N.A.M. et al. (2019) Deep convolution neural network for crack detection on asphalt pavement. J. of Physics: Conference Series, 1349, 012020. DOI: https://doi.org/110.1088/1742-6596/1349/1/012020
7. Pauly, L., Peel, H., Luo, S., Hogg, D., Fuentes, R. (2017) Deeper networks for pavement crack detection. 34th International Symposium on Automation and Robotics in Construction (ISARC), pp. 479–485. DOI: https://doi.org/10.22260/ISARC2017/0066
8. Malovanyi, M.S., Rusyn, I., Diachok, V., Skyba,V., Vozniuk, N. (2024) Sustainable development: environmental protection. Energy saving. Balanced nature management. Collective monograph. Ed. by Prof. Malyovanyi M.S. Kyiv, Yarochenko Ya.V. [in Ukrainian]. https://liegudzyk.com/stalyy-rozvytok-zakhyst-navkolyshnoho-seredovyshchakolektyvna-monohrafiya-2024
9. Delgadillo, R., Bahia, H.U. (2008) Effects of temperature and pressure on hot mixed asphalt compaction: Field and laboratory study. J. of Materials in Civil Engineering, 20(6), 440–448. DOI: https://doi.org/10.1061/(asce)0899-1561(2008)20:6(440)
10. Arbeider, E.A. (2005) A systems approach to the asphalt construction process: thesis for the degree of Dr. ing. Norwegian University of Science and Technology (NTNU). Department of Civil and Transport Engineering. Trondheim.
11. Abdullayev, E.SH., Byedin, A.V. (2014) Analysis of automated systems speed control slide unhook on a separation of bitter. Zbirnyk naukovykh prats Ukrainskoho derzhavnoho universytetu zaliznychnoho transportu, 146, 5–8 [in Ukrainian].
12. Kovryho, Yu.M., Fomenko, B.V., Stepanets, O.V. (2010) Thermal load control system of the TPP-210A boiler using a controller with an internal model. Visnyk ekonomiky transportu i promyslovosti, 10(45), 4–7 [in Ukrainian].
Advertising in this issue:
