Print

2017 №08 (05) DOI of Article
10.15407/as2017.08.06
2017 №08 (07)


Avtomaticheskaya Svarka (Automatic Welding), #8, 2017, pp. 47-54
 

Joint formation in magnetically-impelled arc butt welding of thick-walled pipes from high-strength steels

V.S. Kachinsky and S.I. Kuchuk-Yatsenko


E.O. Paton Electric Welding Institute, NASU 11 Kazimir Malevich Str., 03680, Kiev, Ukraine. E-mail: office@paton.kiev.ua
 
Abstract
Searching for highly-efficient technologies of welding position butt joints of pipes is especially urgent, particularly during operation performance in site. The paper gives the results of comprehensive research on optimization of the technology of pressure welding of pipes with more than 4–5 mm wall thickness, using a controlling magnetic field. Methods of heating pipe edges by magnetically-impelled arc, algorithms of controlling the main parameters of pressure welding have been determined and comprehensive testing of the joints has been performed. Possibility of achieving high values of welded joint impact toughness in welding high-strength pipe steels is shown. 10 Ref., 7 Figures, 5 Tables.
 
Keywords: pressure welding, controlling magnetic field, magnetically-impelled arc, thick-walled pipes, welding technology, site and stationary conditions, mechanical properties
 
 
Received:                02.06.17
Published:               01.08.17
 
 
References
  1. Hagan, D., Riley, N. (1979) MIAB welding. Part 2. Fabrication the Fiesta rear axle. Metal Construction, 625(12), 627–629.
  2. Ganovski, F.J. (1974) The magnetarc welding process. Weld. Met. Fab., June.
  3. Kenji Takagi, Hirokazu Otsuka, Fumiho Abakida et al. (1987) Establishment of optimum welding conditions of magnetically impelled arc butt welding and application to field operation. IIW Doc. III–8801.
  4. Edson, D.A. (1982) Magnetically impelled arc butt welding of thick wall tubes. Ibid., III-726–82.
  5. Kuchuk-Yatsenko, S.I., Kachinsky, V.S., Ignatenko, V.Yu et al. (2010) Magnetically-impelled arc butt welding of parts of automobile range of products. The Paton Welding J., 6, 28–31.
  6. Takagi, K., Aracida, F. (1982) Magnetically impelled arc butt welding of gas pipeline. Metal Construction, 10, 542–548.
  7. Gelman, A.S. (1950) Resistance welding. Moscow: Mashinostroenie.
  8. Orlov, V.D., Dmitriev, Yu.V., Chakalev, A.A. et al. (1975) Technology and equipment of resistance welding. Moscow: Mashinostroenie.
  9. (1992) Flash-butt welding. Ed. by S.I. Kuchuk-Yatsenko. Kiev: Naukova Dumka.
  10. Kuchuk-Yatsenko, S.I., Shvets, Yu.V., Zagadarchuk, V.F. et al. (2012) Flash-butt welding of thick-walled pipes from high-strength steels of K56 strength class. The Paton Welding J., 5, 2–7.