Print

2021 №03 (07) DOI of Article
10.37434/as2021.03.08
2021 №03 (01)


Avtomaticheskaya Svarka (Automatic Welding), #3, 2021, pp. 47-53

High-efficient sources for arc welding based on capacitive energy storage systems

O.E. Korotynskyi, M.I. Skopyuk, I.V. Vertetska


E.O. Paton Electric Welding Institute of the NAS of Ukraine. 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine. E-mail: office@paton.kiev.ua

A new class of high-efficient arc welding equipment is proposed, which is based on wide application of capacitive energy storage systems, in which high-capacity capacitors with a double electric layer are used as such storages. The paper is a study of the structure of sources, which are based on switching-modulation conversion of welding current. Procedures of signal conversion in the proposed sources, using the charge transfer method are analyzed in detail. Analysis of dynamic characteristics of this type of sources was performed, and basic equations were derived, which characterize different types of capacitive welding current converters. 13 Ref., 1 Tabl., 4 Fig.
Keywords: arc welding, capacitive energy storage system, double electric layer capacitor, charge transfer method, topological structures of the sources, step-down type converter


Received: 12.02.2021

References

1. Lebedev, V.K. (1995) Trends of development of power sources for arc welding. Avtomatich. Svarka, 5, 3–6 [in Russian].
2. Pentegov, I.V., Rymar, S.V., Zhernosekov, A.M., Sidorets, V.N. (2012) Electromagnetic compatibility of power sources of welding arc. Elektrotekhnika i Elektromechanika, 3, 34–38 [in Russian].
3. Borisov, D.A. (2010) Dynamic processes in power sources for welding at high-frequency alternating current welding. In: Syn. of Thesis for Cand. of Tech. Sci. Degree. Saratov [in Russian].
4. Paton, B.E., Korotynsky, O.E., Skopyuk, M.I., Drachenko, M.P. (2009) Hybrid device for conversion of dc energy at input to ac energy at output. Ukraine Pat. 41218 [in Ukrainian].
5. Rudyk, S.D., Turchaninov, V.E., Florentsev, S.N. (1999) High-power single-step converter of dc voltage with “soft” commutation of power key. Elektrotekhnika, 4, 55–58 [in Russian].
6. Rudyk, S.D., Turchaninov, V.E., Florentsev, S.N. (1998) Prospective welding current sources. Ibid., 7, 8–13 [in Russian].
7. Burlaka, V.V., Gulikov, V.V. (2012) Three-phase inverter power source with direct conversion and increased power factor. The Paton Welding J., 7, 35-37.
8. Korotynsky, A.E. (2007) High-efficient power sources for arc welding based on inductance-capacitance converters. In: Syn. of Thesis for Dr. of Tech. Sci. Degree. Kiev [in Russian].
9. Lebedev, V.K., Korotynsky, A.E. (1994) Ac arc in the circuit with inductance and capacitance connected in series. Avtomatich. Svarka, 12, 47–48 [in Russian].
10. Milyakh, A.N., Volkov, I.V. (1974) Constant current systems based on inductance-capacitance converters. Kiev, Naukova Dumka [in Russian].
11. Korotynsky, A.E. (1999) Peculiarities of operation of highfrequency welding inverters on the basis of an artificial long line. Avtomatich. Svarka, 1, 76–77.
12. Mark Gebbia (2013) Dual nature of supercapacitors. Elektronnye Komponenty, 6, 104–107.
13. Korotynsky, A.E., Drachenko, N.P., Shapka, V.A. (2014) Peculiarities of application of supercapacitors in devices for pulse welding technologies. The Paton Welding J., 9, 34-38. https://doi.org/10.15407/tpwj2014.09.05
14. Korotynsky, A.E. (2002) State-of-the-art, tendencies and prospects of development of high-frequency welding converters (Review). Ibid., 7, 44-50.
15. Paton, B.E., Dudko, D.A., Korotynsky, A.E., Kisterskaya, L.D. Autonomous device for arc welding. Ukraine Pat. 23804 А. Publ. 31.08.98 [in Russian].
16. Pentegov, I.V. (1982) Fundamentals of theory of charging circuits of capacitive energy storage. Kiev, Naukova Dumka [in Russian].

Advertising in this issue: