| 2021 №06 (05) |
DOI of Article 10.37434/as2021.06.06 |
2021 №06 (07) |
Avtomaticheskaya Svarka (Automatic Welding), #6, 2021, pp. 39-43
Influence of conditions of welding pool protection by argon on
V.P. Prilutsky, L.Ye. Yeroshenko
E.O. Paton Electric Welding Institute. 11 Kazymyr Malevych Str., 03150 Kyiv, Ukraine. E-mail: office@paton.kiev.ua
A procedure was developed that allows an experimental determination of a correlation between an increased oxygen concentration in the argon of welding torch, intensity of radiation of atomic oxygen lines OI in the arc and the corresponding change in the properties of welds in a real-time welding of titanium. It was found that an increase in oxygen content in argon to 0.34 vol. % during violation of the weld protection leads to an increase in the tensile strength of the weld metal by 30% and at the same time reduction in the ductility by 65%. The proposed procedure can be used to create a database in the development of systems for predicting operational reliability of welded structures of titanium alloys by quantitative indices of changes in the characteristics of the weld metal during welding. 9 Ref., 4 Tabl., 8 Fig.
Keywords: argon arc welding (TIG), VT1-0 titanium alloy, violation of argon protection, gas impurities, prediction of weld properties
Received: 25.02.2021
References
1. DSTU GOST 10157:2019: Gaseous and liquid argon. Specifi cations (GOST 10157-2016, IDT) [in Ukrainian].2. Gurevich, S.M., Zamkov, V.N., Blashchuk, V.E. et al. (1986) Metallurgy and technology of welding of titanium and its alloys. 2nd Ed. Kiev, Naukova Dumka [in Russian].
3. Mitra, T.K., Venkataraman, G. (1996) Eff ect of shielding on the properties titanium welds. WRI J., 17(4), 117–121.
4. Shchipkov, M.D., Zelenova, M.I., Petrov, V.N. (1974) Pressure treatment and welding. Infl uence of shielding atmosphere composition on fi nal hydrogen content in weld of 3V alloy. Leningrad, Mashinostroenie [in Russian].
5. Zubretskaya, N.A., Fedin, S.S. (2014) Information processing systems. Prediction of strength of spot welded joints. Issue 5 (121) [in Ukrainian].
6. Lazorenko, Ya.P., Shapovalov, E.V., Kolyada, V.A. (2011) Analysis of spectrum of the welding arc light for monitoring of arc welding (Review). The Paton Welding J., 11, 24–27.
7. Zajdel, A.N., Prokofi ev, V.K., Rajsky, S.M. et al. (1977) Tables of spectrum lines. Moscow, Nauka [in Russian].
8. Eroshenko, L.V., Prilutsky, V.P., Zamkov, V.N. (1994) Video spectrum procedure for investigation of welding arc in argon. Avtomatich. Svarka, 7-8, 7–9 [in Russian].
9. Kaptsov, N.A. (1950) Electric phenomena in gases and vacuum. Moscow-Leningrad, Tekh.-Teoretich. Lit-ra [in Russian].
Advertising in this issue:
