| 2000 №01 (01) | 2000 №01 (03) |
The Paton Welding Journal, 2000, #1, 12-19 pages
Production and welding of high-temperature composite materials (Review)
V.R. Ryabov
E.O. Paton Electric Welding Institute of the NASU 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine.Abstract
Peculiarities of composite materials (CM) on base of nickel, chromium and cobalt alloys, designed for operation at elevated temperatures, are considered. The methods of CM producing are described and different examples of manufacture of weldments are given.
Keywords: composite material, high-temperature resistance, fibres, nickel, chromium, cobalt, diffusion bonding, spot, arc welding
References
1. Bannykh, O. A., Povarova, K.V., Kutienkov, V.A. et al. (1991) High-temperature composite material with metal matrix. In: Composite materials. Collection of scientific, papers, 63 - 67. Kiev: E.O. Paton Electric Welding Institute.2. Karpinos, D.M., Tuchinskii, L.I., Sapozhnikov, A.B. et al. (1985) Composite materials in engineering. Kiev: Tekhnika.
3. Pilipovskii. Yu.L., Grudina, T.V., Sapozhnikov A.B. et al. (1990) Ibid. Kiev: Tekhnika.
4. Portnoi, К.1., Babich, B.N., Svetlov, I.L. (1979) Nickel-base composite materials. Moscow: Metallurgia.
5. Nishida, M., Minakuchi. K., Ando, K. (1995) Fabrication of high-strength steel fibre reinforced metal matrix composites by explosive bonding and their tensile properties. Welding International, vol. 9, 3, 179-184.
6. Potapov, I.N., Lebedev, V.N., Kobelev, A.G. et al. (1986) Laminated metallic compositions. Moscow: Metallurgia.
7. Omel’chenko, V.I., Natapov, B.S., Banas. F.P. et al. (1972) Technology of production and properties of high-temperature resistant reinforced sheet. Aviats. Prom., 1, 56 - 58.
8. Kladnitskii. E.I., Botvinov, V.E,, Banas, F.P. et al. (1977) Reinforcement of shells of flame tubes of GTE combustion chambers. Ibid, 9, 26-29.
9. Shigekawa. Yu., Nojiri, Ya.. Nishida, M. et al. (1977) Ehime daigaku kogakubu kiyo. Mem. Eac. Eng. Ehime Univ., 16, 463-471.
10. Kivineva, E.I., Olsom, D.I., Matlock, D.K. (1995) Particulate reinforced metal matrix composite as a weld deposit. Welding J., 3,83 92.
11. Portnoi, К.I., Babich, B.l. (1974) Dispersion-strengthened materials. Moscow: Metallurgia.
12. Kenyon, N., Hrubec. R.J. (1974) Brazing of a dispersion strengthened nickel base alloy made by mechanical alloying. Welding 7, vol. 53,4, 145-152.
13. Moore, T.J., Holko, K.H. (1970) Solid-state welding of TD-nickel bar. Ibid, vol. 49, 9, 395 - 409.
14. Holko, K.H. (1973) An improved diffusion welding technique for TD-Ni-Cr sheet. Ibid, vol. 52,11, 515 - 523.
15. Moore, T.J. (1974) Solid state and fusion resistance spot welding of TD-Ni-Cr sheet. Ibid, vol. 53, 1, 37 48.