| 2000 №02 (05) | 2000 №02 (07) |
The Paton Welding Journal, 2000, #2, 25-28 pages
Improvement of heat and wear resistance of parts using the method of thermal spraying of coatings of chromium-based alloys
V.F. Gorban
I.M. Frantsevich Institute for Materials Science Problems, NASU, Kyiv, Ukraine.Abstract
Effect of initial state of chromium-based materials used for thermal spraying on the properties of coatings is investigated. Interrelation between physical-chemical properties of coatings and technology of spraying and their effect on service characteristics of chromium coatings are studied.
Keywords: thermal spraying, wear, coatings, chromium-based alloys
References
1. Gridnev, V.N., Trefilov, V.I. (1968) Investigations on chromium problems. Physico-chemical investigations of heat-resistant alloys. Transactions, 154 - 162. Moscow: Nauka.2. Trefilov, V.I., Milman, Yu.V., Firstov, S.A. (1975) Physical fundamentals of strength of refractory metals. Kiev: Naukova Dumka.
3. Turtsevich, E.V., Rakitsky, A.N., Gorban, V.F. et al. (1987) Structure and phase composition of thermal coatings from lowalloyed chromium alloys. Poroshkovaya Metallurgia, 11, 51 - 55.
4. Gorban, V.F., Rakitsky, A.N.,Trefilov, V.I. et al. Chromium alloy. USSR author’s certificate 963305, Int. Cl. C22 C27/06/C23 C7/00. Publ. 01.07.82.
5. Tsypunov, A.G., Chernyak, V.I., Rakitsky, A.N. et. al. (1993) Granulated chromium powders for thermal spraying. Materials of III All-Union Conf, on Granule Metallurgy, 139 - 143. Moscow: VILS.
6. Rakitsky, A.N., Sychyov, V.V., Andreev, S.A. (1991) Procedure of tribotechnical tests of chromium coatings for piston rings of inner combustion engines. Zavodskaya Laboratoria, 5, 47 - 50.
7. Borisov, Yu.S., Petrov, S.V. (1995) Application of supersonic jets in the technology of thermal spraying. Avtomaticheskaya Svarka, 1, 41 - 44.
8. Tavadze, F.N., Mikadze, O.I., Kuteliya, E.R. et al. (1984) Mechanisms of high-temperature oxidizing of chromium. Izv. AN USSR. Neorganich. Materialy, 7, 1121 – 1125.