| 2005 №01 (09) | 2005 №01 (11) |
The Paton Welding Journal, 2005, #1, 40-45 pages
Electric heat sources for brazing
A.M. Zhadkevich
E.O. Paton Electric Welding Institute of the NASU. 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine.Abstract
History of application of electric heat sources for brazing of different materials is described. Specifics and capabilities of the processes, performed using equipment based on electric heating, are analyzed. Contribution of individual specialists to the development of equipment and technologies of brazing is outlined.
Keywords: brazing, arc heating, resistance heating, vacuum, electric furnaces, electric contact heating, history of engineering
References
1. Shevtsov, M.S., Borodachyov, A.S. (1983) Development of electrothermal engineering. Moscow: Energoatomizdat.2. Khrenov, K.K., Kornienko, A.N. (1982) Welding of metals in Russia before the October Revolution. In: Welding in the USSR. Moscow: Nauka.
3. Zhadkevich, A.M., Izhevsky, V.P. (2004) At the origin of electrometallurgy. Advances in Electrometallurgy, 4, 50–54.
4. Lashko, N.F., Lashko-Avakyan, S.V. (1959) Brazing of metals. Moscow: Mashgiz.
5. (1975) Reference book on brazing. Ed. by S.N. Lotsmanov, I.E. Petrunin, V.P. Frolov. Moscow: Mashinostroenie.
6. Metyolkin, I.I., Shmelyov, A.E. (1972) About brazing of ceramics with active metals. Fizika i Khimiya Obrab. Ma- terialov, 4, 123–128.
7. Kozlov, V.V., Gorchakov, R.K., Gruzdev, B.L. et al. (1978) Brazing of pieces of VT9 alloy. Avtomatich. Svarka, 7, 53–55.
8. Dolgov, Yu.S., Nesterov, A.F., Tkachenko, A.G. et al. (1986) Technological features of brazing of high-resistant nickel alloys. Ibid., 12, 44–47.
9. Perevezentsev, B.N., Krasnopevtsev, A.Yu., Ryabov, V.N. (1985) Variation of gas medium composition in brazing in the presence of zinc vapors. Ibid., 11, 73–74.
10. Klyuchnikov, I.P., Gejkin, V.A., Kryukov, M.A. (2000) Development of permanent brazed joints in aircraft engines. In: Proc. of Int. Math. Sci.-Techn. Conf, on Brazing-2000, Toliatti, 2000.
11. Perevezentsev, B.N., Tyunin, Yu.N., Krasnopeev, A.Yu. (1980) Application of active metal vapors in brazing of steels. In: Brazing in mechanical engineering. Omsk: OPI.
12. Lashko, S.V., Upolovnikova, G.N., Lashko, N.F. (1975) Contact solid-liquid activation of surface of aluminium alloys in fluxless air brazing. Avtomatich. Svarka, 7, 27–30.
13. Lashko, S.V., Upolovnikova, G.N., Lashko, N.F. (1975) Contact-reactive activation of aluminium alloys during brazing in nonoxidation medium. Ibid., 8, 27–30.
14. Kostina, L.A., Chastikov, S.M., Yudin, V.M. (1976) Braz¬ing of niobium alloy with corundum ceramics. Svarochn. Proizvodstvo, 10, 43–44.
15. Khorunov, V.F., Malevsky, Yu.B., Nesmikh, V.S. et al. (1968) Effect of some technological parameters on weldingbrazing process. Avtomatich. Svarka, 11, 22–25.
16. Nesmikh, V.S., Malevsky, Yu.B., Gubenko, B.G. et al. (1970) Contact-reactive brazing of copper with refractory metals. Ibid., 8, 59–61.
17. Ivanov, I.N., Kuznetsova, G.P. (2000) Current brazing al¬loys and equipment in tool production. In: Proc. of Int. Math. Sci.-Techn. Conf, on Brazing-2000, Toliatti, 2000.
18. Yakobashvili, S.B., Mogilner, I.Yu. (1980) Resistance braz¬ing of copper connection terminals with elements of Fe-Al heaters. Avtomatich. Svarka, 12, 57–59.
19. Krivoshej, A.V., Beltsev, A.N. (1974) Soldering and weld¬ing in manufacturing of electronics. Moscow: Energiya.
20. (1968) Welding equipment. Catalogue-Refer. book. Part 2. Kiev: Naukova Dumka.
21. Petruchuk, L.N., Karakozov, E.S., Grigorievsky, V.I. (1976) Heater for pressure welding, brazing and heat treat¬ment of multi-layer panels. Avtomatich. Svarka, 12, 50--51.
22. Romanovsky, G.F., Kvasnitsky, V.F., Safonov, A.I. et al. (1999) The 40th anniversary of Welding Chair at UMGTU. Zbirnyk Nauk. Prats UDMTU, 6, 3–19.
23. Frolov, V.P., Markova, I.Yu., Eroshev, V.K. et al. (2001) Development in brazing in the XX century. In: Current materials, technologies, structures. Moscow: TsRDZ.
24. Tabelev, V.D., Kareta, N.L., Rossoshinsky, A.A. et al. (1986) Brazing of low-alloy steel by copper-phosphorus brazing alloy. Avtomatich. Svarka, 2, 73–74.
25. Pirozhkov, N.G. (1989) Induction brazing of relay bodies. Ibid., 4, 73.
26. Lebedev, V.K., Pismenny, A.S., Martynova, T.I. (1992) Experience of application of composite brazing alloy for pressure welding-brazing. Ibid., 9/10, 42–43.
27. Pashchenko, M.A., Frumin, E.I., Bazilsky, S.V. (1987) Induction brazing of geological drilling bits in flux melt. Ibid., 5, 71–72.
28. Buslovich, S.L., Kotsynsh, I.A., Kalkut, L.E. et al. (1976) Automation of soldering of circuit boards. Moscow: Energiya.
29. Storchaj, E.I. (1975) Kinetics and mechanism of fluxing process in brazing of aluminium and its alloys in melts of chloride-fluoride salts. Avtomatich. Svarka, 1, 36–39.
30. Protocols of technical meetings. Archives of the E.O. Paton Electric Welding Institute. Doc. 2440.
31. Protocols of technical meetings. Archives of the E.O. Paton Electric Welding Institute. Doc. 2440.
32. Lebedev, V.K., Tabelev, V.D., Pismenny, A.S. (1983) Butt pressure welding of steel pipelines. Avtomatich. Svarka, 9, 25–27.
33. Pismenny, A.S., Shinlov, M.E., Safronov, E.A. (1998) Some peculiarities of induction butt welding-brazing of tubes enameled inside. Ibid., 10, 32–37.
34. Pismenny, A.S. (1998) New in application of induction heating in welding and related technologies. Ibid., 11, 54–60.
35. Khorunov, V.F., Maksymova, S.V., Zvolinsky, I.V. et al. (1999) Brazing of heat-resistant nickel alloys using the arc heating. Zbirnyk Nauk. Prats UDMTU, 6, 114–116.
36. Paton, B.E., Gvozdetsky, V.S., Dudko, D.A. et al. (1979) Microplasma welding. Kiev: Naukova Dumka.
37. Popov, Yu.V., Yampolsky, V.M., Magnitov, V.S. et al. (1972) Excitation of arc discharge with hollow cathode and methods of control of discharge. Izvestiya Vuzov. Mashi- nostroenie, 10, 188–190.
38. Yampolsky, V.M., Nerovny, V.M. (1981) Strengthening and repair of rotor blades of gas turbine engines by vacuum brazing. Trudy MVTU, 363, 72–78.
39. Terentiev, V.A., Shapenkov, V.G., Zubkov, N.S. (1990) Improvement of technology of arc welding-brazing. Avto- matich. Svarka, 7, 58–62.
40. Vanin, V.S. (1962) Welding and brazing of metals in glow discharge. Ibid., 4, 23–25.
41. Kotelnikov, D.I. (1981) Technological features and prob¬lems of brazing in glow discharge plasma of pieces of individual and mass production. In: New developments in field of brazing. Kiev: PWI.
42. Zinovieva, V.F., Galtseva, S.M., Emelianov, S.V. et al. (1990) Glow discharge brazing of dissimilar materials and hard alloys. Avtomatich. Svarka, 11, 71–73.
43. Kuzhel, A.V., Khorunov, V.F., Malevsky, Yu.B. (1979) Technology of brazing of lamellar structures. In: Inform. letter of AS of Ukr. SSR, 9. Kiev: PWI.
44. Kuzhel, A.V., Khorunov, V.F., Malevsky, Yu.B. et al. (1979) Pilot-production installation for brazing of lamellarfinned heat exchangers. In: Inform. letter of AS of Ukr. SSR, 28. Kiev: PWI.
45. Kislitsyn, V.M. (1982) Brazing of semiconductor devices with electric resistance heating. In: Current methods of brazing. Kiev: PWI.
46. Khryakin, V.E., Lakedemansky, A.V. (1974) Refer. book of brazing operator. Moscow: Mashinostroenie.
47. Kuchuk-Yatsenko, V.S., Shvets, V.I., Gordan, G.N. (1992) Formation of transition zones in joint of stainless steel Kh18N9T with alloy AD1 during brazing by P425 brazing alloy. In: New developments in brazing. Kiev: PWI.
48. Puzrin, L.G., Bojko, G.A., Atroshenko, M.G. (1975) Autovacuum brazing. Kiev: Znanie.