| 2007 №03 (01) | 2007 №03 (03) |
The Paton Welding Journal, 2007, #3, 6-9 pages
Energy conditions of explosion welding of layered composite materials
V.A. Chuvichilov, S.V. Kuzmin, V.I. Lysak
Volgograd State Technical University, Volgograd, RussiaAbstract
Energy conditions of formation ofjoints in layered composite materials by explosion welding using stack and plane-parallel collision schemes are analysed. It is established that the stack cladding scheme is indicated in terms of cost and technology, starting from a certain thickness of target plate.
Keywords: explosion welding, composite materials, planeparallel and stack welding schemes, energy conditions, formation of joint
References
1. Sedykh, V.S., Kazak, N.N. (1971) Explosion welding and properties of welded joints. Moscow: Mashinostroenie.2. Lysak, V.I., Kuzmin, S.V. (2002) Classification of process schemes of explosion welding of metals. Svarochn. Proizvodstvo, 9, 33–39.
3. Kobelev, A.G., Lysak, V.I., Chernyshov, V.N. et al. (2002) Production of layered composites. Moscow: Intermet Engineering.
4. Sedykh, V.S., Sonnov, A.P. (1970) Calculation of energy balance of explosion welding process. Fizika i Khimiya Obrab. Materialov, 2, 6–13.
5. Sedykh, V.S. (1985) Classification, evaluation and relationship of main explosion welding parameters. In: Transact. on Explosion Welding and Properties of Welded Joints. Vol¬gograd: VPI, 3–30.
6. Aleksandrov, E.V., Sokolinsky, V.B. (1969) Applied theory and calculations of impact systems. Moscow: Nauka.
7. (1971) Laboratory works on welding. Ed. by G.A. Nikolaev. Moscow: Vysshaya Shkola.
8. McLean, D. (1965) Mechanical properties of metals. Moscow: Metallurgiya.
9. Kuzmin, S.V., Chuvichilov, V.A., Lysak, V.I. (2005) Time conditions of formation of joint in explosion welding. Pers- pektiv. Materialy, 1, 85–91.
10. Lysak, V.I., Trykov, Yu.P. (1984) Detonation characteristics of explosives for processing of metals. Volgograd: VPI.
11. Kriventsov, A.N., Sedykh, V.S., Baluev, A.V. et al. (1998) Peculiarities of explosion welding process in zones of technological bending of elements being welded. Svarochn. Proiz- vodstvo, 2, 6–10.