| 2008 №06 (06) | 2008 №06 (08) |
The Paton Welding Journal, 2008, #6, 35-38 pages
Methods of manufacturing and application of rapidly quenched braze alloy
I.N. Pashkov, L.I. Iliina, I.V. Rodin, S.V. Shokin, S.A. Tavolzhansky
CJSC ALARM, Moscow, Russia.Abstract
Methods of manufacturing rapidly quenched braze alloys in the form of 0.3–6.0 mm diameter wire from hard-to-deform materials in the plastic state are considered. Composition of braze alloys on Cu-P, Cu-P-Sn, Cu-Zn-P-Ni base and other systems develop the quasi-eutectic structure containing supersaturated solid solution with distributed phases of copper phosphide as a result of quenching. Examples of application of rapidly quenched braze alloys are given.
Keywords: brazing, rapidly quenched braze alloys, band, wire, microstructure, manufacturing methods, application
References
1. Kalin, B.A., Fedotov, V.T., Sevryukov, O.N. et al. (1996) Amorphous strip braze alloys for brazing. Experience of development of technology for production and applications. Svarochn. Proizvodstvo, 1, 15–19.2. (1986) Ultrarapid quenching of molten alloys: Transact. Ed. by G. German. Moscow: Metallurgiya.
3. Vasiliev, V.A., Lozovan, A.A., Pashkov, I.N. et al. (2002) Scientific prerequisites and practice of production of metastable materials. Moscow: RGTU iin. K.E. Tsiolkovsky.
4. Vasiliev, V.A., Mitin, B.S., Pashkov, I.N. et al. (1998) Ultrarapid solidification of melt. Moscow: Intermet Engineering.
5. Pashkov, I.N., Iliina, I.I., Shokin, S.V. et al. (1996) Rapidly-quenched wire and strip of silver-free braze alloys: new aspects of production and application. Role of brazing processes in development of new technique. Part 2. Moscow: TsRDZ.
6. Pashkov, I.N., Iliina, I.I., Shokin, S.V. et al. (2003) Influence of zirconium microalloying of copper-phosphorus-tin system and production technology on structure and properties of PMFOTsr 6-4-0.03 and P14 braze alloys, as well as joints brazed by them. In: Proc, of Conf, on Brazing, Current Technologies, Materials, Structures, Service Experience of Brazed Structures. Moscow: TsRDZ, 86–92.
7. Kalin, B.A., Plyushchev, A.N., Fedotov, V.T. et al, (2001) Influence of structural state of the braze alloy on physico- mechanical properties of brazed joints. Svarochn. Proizvodstvo, 8, 38–41.