| 2008 №11 (12) | 2008 №11 (14) |
The Paton Welding Journal, 2008, #11, 92-98 pages
Deformation-energy aspects and practical applications of explosion welding process
V.I. Lysak, S.V. Kuzmin
Volgograd State Technical University, Volgograd, RussiaAbstract
Deformation-energy aspects of explosion welding processes have been analyzed. The established functional correlation between the parameters of this process in combination with the developed mathematical models, enables controlling the energy and temperature-time conditions in the joint zone and formation of the required structure and properties in the produced composite materials. Examples of effective application of explosion welding are given.
Keywords: explosion melding, laminated composite mate¬rials, plastic deformation, energy balance, process control
References
1. Sedykh, V.S., Kazak, N.N. (1971) Explosion welding and properties of welded joints. Moscow: Mashinostroenie.2. Sedykh, V.S. (1985) Classification, evaluation and relationship of principal parameters of explosion welding. In: Coll. on explosion welding and properties of welded joints. Volgograd: VolgPI.
3. Krupin, A.V Soloviov, V.Ya., Sheftel, N.I. et al. (1976) Explosion deformation of metals. Moscow: Metallurgiya.
4. Konon, Yu.A., Pervukhin, L.B., Chudnovsky, A.D. (1987) Explosion welding. Moscow: Mashinostroenie.
5. Kudinov, V.M., Koroteev, A.Ya. (1978) Explosion welding in metallurgy. Moscow: Metallurgiya.
6. Gelman, A.S., Chudnovsky, A.D., Tsemakhovich, B.D. et al. (1978) Explosion cladding of steel. Moscow: Mashinostroenie.
7. Zakharenko, I.D. (1990) Explosion welding of metals. Minsk: Navuka i Tekhnika.
8. Kuzmin, G.E., Paj, V.V., Yakovlev, I.V. (2002) Experimental-analytical methods in problems of dynamic loading of materials. Novosibirsk: SO RAN.
9. Deribas, A.A. (1980) Physics of strengthening and explosion welding. Novosibirsk: Nauka.
10. Krasulin, Yu.L. (1967) Dislocations as the active centers in topochemical reactions. In: Theoretical and experimental chemistry, Vol. 3, Issue 1.
11. Rykalin, N.N., Shorshorov, M.Kh., Krasulin, Yu.L. (1965) Physical and chemical problems of joining dissimilar materi¬als. Izvestiya AN SSSR. Neorgan. Materialy, 1(1), 29–36.
12. Krasulin, Yu.L., Shorshorov, M.Kh. (1967) About mechanism of joining of dissimilar materials in solid state. Fizika i Khimiya Obrab. Materialov, 1, 89–97.
13. Shorshorov, M.Kh., Karakozov, E.S., Myakishev, Yu.V. (1971) Specifics of interaction between joined metals at higher temperature and pressure. Ibid., 6, 68–74.
14. Kriventsov, A.N., Sedykh, V.S. (1969) About role of metal plastic deformation in the joint zone during explosion welding. Ibid., 1, 132–141.
15. Bondar, M.P., Ogolikhin, V.M. (1985) About plastic deformation in the joint zone during explosion cladding. Fizika Goreniya i Vzryva, 21(2), 147–157.
16. Chugunov, E.A., Kuzmin, S.V., Lysak, V.I. et al. (2001) Principles of near-weld zone metal deformation in explosion welding of aluminium. Fizika i Khimiya Obrab. Materialov, 3, 39–44.
17. Kuzmin, S.V., Peev, A.P., Lysak, V.I. et al. (2003) Specifics of plastic deformation of near-weld zone metal in explosion welding of copper with aluminium. Ibid., 1, 71–76.
18. Lysak, V.I., Kuzmin, S.V. (2005) Explosion welding. Moscow: Mashinostroenie.
19. Sedykh, V.S., Sonnov, A.P. (1970) Calculation of energy balance of explosion welding process. Fizika i Khimiya Obrab. Materialov, 2, 6–13.
20. Lysak, V.I., Sedykh, V.S., Trykov, Yu.P. (1973) Determination of critical limits of explosion welding process. Svarochn. Proizvodstvo, 5, 6–8.
21. Lysak, V.I., Kuzmin, S.V. (2003) Explosive welding of metal layered composite materials. Ed. by B.E. Paton. Kiev: PWI.