Print

2010 №10 (10) 2010 №10 (02)


TPWJ, 2010, #10, 2-6 pages
 
ADEQUACY OF THERMOHYDRODYNAMIC MODEL OF THROUGH PENETRATION IN TIG AND A-TIG WELDING OF NIMONIC-75 NICKEL ALLOY


Journal                    The Paton Welding Journal
Publisher                 International Association «Welding»
ISSN                       0957-798X (print)
Issue                       № 10, 2010 (October)
Pages                      2-6
 
 
Authors
D.V. KOVALENKO1, D.A. PAVLYAK2, V.A. SUDNIK2 and I.V. KOVALENKO1

1E.O. Paton Electric Welding Institute, NASU, Kiev, Ukraine
2Tula State University, Tula, Russian Federation
 
 
Abstract
Results of experiments on weld formation in TIG and A-TIG welding of Nimonic-75 alloy, and results of computer simulation of the effect of convection on «sand glass» shape of weld are presented. The experiments were carried out with and without activating flux PATIG Nim-75-A on 3.15 mm thick plates. Adequacy of the model was evaluated by comparing the sizes of the real and simulated weld sections. The causes of recirculation flows were analyzed. Correlation of the experimental and computation data was revealed.
 
 
Keywords: TIG and A-TIG welding, nickel alloy, penetration, mathematical model, adequacy of mathematical model
 
 
Received:                ??.??.??
Published:               28.10.10
 
 
References
1. Gurevich, S.M., Zamkov, V.N., Kushnirenko, N.A. (1965) Increase in effective penetration during argonarc welding. Avtomatich. Svarka, 9, 1-4.
2. Gurevich, S.M., Zamkov, V.N. (1966) Some peculiarities of nonconsumable electrode welding of titanium with application
of fluxes. Ibid., 12, 12-16.
3. Ostrovsky, O.E., Kryukovsky, V.N., Buk, B.B. et al. (1977) Effect of activating fluxes on penetrating capacity of welding arc and energy concentration in anode spot. Svarochn. Proizvodstvo, 3, 3-4.
4. Savitsky, M.M., Leskov, G.I. (1980) Mechanism of effect of electronegative elements on penetrating capacity of arc with tungsten cathode. Avtomatich. Svarka, 9, 17-22.
5. Zamkov, V.N., Prilutsky, V.P. (1987) Distribution of current density in anode spot during welding of titanium. Ibid., 3, 19-22.
6. Heiple, C.R., Roper, J.R. (1982) Mechanisms for minor element effects on GTA fusion zone geometry. Welding J., 61(4), 97-102.
7. Mills, K.S., Keene, B.I., Brooks, R.F. et al. (1984) The surface tension of 304 and 316 type steels and their effects on weld penetration. In: Proc. of Conf. on Centenary of Metallurgy Teaching (Glasgow, 1984), 1-11.
8. Oreper, G.M., Eagar, T.W., Szekely, J. (1983) Convection in arc weld pools. Welding J., 62(11), 307-312.
9. Zhao, Y. (2006) The study of surface-active element oxygen on flow patterns and penetration in A-TIG welding. Metallurg. and Mater. Transact. B, 37(6), 485-493.
10. Tanaka, M. (2005) Effect of surface active elements on weld pool formation using TIG arcs. Welding Int., 19 (11), 870-876.
11. Zhang, R.H., Fan, D. (2007) Numerical simulation of effects of activating flux on flow patterns and weld penetration in A-TIG welding. Sci. and Techn. of Welding and Joining, 12(1), 15-23.
12. Wang, Y., Shi, O., Tsai, H.L. (2001) Modelling of the effects of surface-active elements on flow patterns and weld pool penetration. Metalurg. and Mater. Transact. B, 32(2), 145-161.
13. Yushchenko, K.A., Kovalenko, D.V., Krivtsun, I.V. et al. (2008) Experimental studies and mathematical modelling of metal penetration in TIG and A-TIG stationary arc welding. IIW Doc. 212-1117-2008.
14. Yushchenko, K.A., Kovalenko, I.V., Kovalenko, D.V. et al. (2000) A-TIG welding of nickel alloy Nimonic-75. Svarshchik, 4, 26-27.
15. Lucas, W., Howse, D. (1996) Activating flux - increasing the performance and productivity of the TIG and plasma processes. Welding & Metal Fabrication, 65(1), 11-17.
16. Howse, D., Lucas, W. (2000) Investigation into arc constriction by active fluxes for tungsten inert gas welding. Sci. and Techn. of Welding and Joining, 5(3), 189-193.
17. Perry, N., Marya, S., Soutif, E. (1999) New perspectives of flux assisted GTA welding in titanium structures, 55-62.18. Leconte, S., Pillard, P., Chaelle, P. et al. (2007) Effect of flux containing fluorides on TIG welding process. Welding and Joining, 12(2), 120-126.
19. Paton, B.E., Zamkov, V.N., Prilutsky, V.P. et al. (2000) Contraction of the welding arc caused by flux in tungstenelectrode argonarc welding. The Paton Welding J., 1, 5-11.
20. Xu, Y.L., Dong, Z.B., Wei, Y.H. et al. (2007) Marangoni convection and weld pool shape variation in A-TIG welding process. Theoretical and Applied Fracture Mechanics, 48, 178-186.
21. Sudnik, W., Radaj, D., Erofeev, W. (1998) Validation of computerized simulation of welding processes. In: Mathematical modelling of weld phenomena 4. London: IOM Commun., 477-493.
22. Erofeev, V.A., Karpukhin, E.V., Sudnik, V.A. (2001) Computer simulation of nonstationary laser welding. Computer technologies in joining of materials. In: Proc. of 3rd All-Union Sci.-Techn. Conf. (Tula, 9-11 October 2001). Tula: TulGU, 111-118.
23. B5 HR 20-72: Specification for nickel-chromium-titanium heat-resisting alloy plate, sheet and strip. Great Britain.
24. Sudnik, V.A., Erofeev, V.A., Richter, K.H. et al. (2006) Numerical modelling of the EBW process. In: Computer techn. in welding and manufacturing. Kiev: PWI, 295-300.
25. Nicrofer 2520-alloy 75: ThissenKrupp VDM Material Data Sheet, 4035.
26. Zhao, C.X., Van Steijn, V., Richardson, L.M. et al. (2007) Unsteady interfacial phenomena during inward weld pool flow with an active surface oxide. Sci. and Techn. of Welding and Joining, 14(2), 132-140.