Print

2017 №12 (08) DOI of Article
10.15407/tpwj2017.12.01
2017 №12 (02)


The Paton Welding Journal, 2017, #12, 4-11 pages
 

Automated designing of manufacturable high-temperature alloy composition on nickel base for manufacture of all-cast nozzle apparatuses

S.V. Gajduk1, V.V. Kononov1 and V.V. Kurenkova2


1Zaporozhye National Technical University 64 Zhukovsky Str., 69063, Zaporozhye, Ukraine. E-mail: rector@zntu.edu.ua
2LLC «Paton Turbine Technologies» 26 Raketnaya Str., 036028, Kiev, Ukraine. E-mail: VKurenkova@patontt.com
 
Abstract
According to the algorithm of a developed comprehensive analytical solution method (CASM), a new cast high-temperature corrosion-resistant nickel alloy ZhS3LS-М has been developed for manufacture of all-cast nozzle appliances. The developed alloy is characterized by the high-temperature strength s40975 = 180–200 MPa at the level of the industrial non-corrosion-resistant alloy VZhL12E as well as technological weldability and corrosion resistance at the level of commercial weldable corrosion-resistant alloy ZhS3LS. 24 Ref., 11 Tables, 1 Figure.
Keywords: cast high-temperature nickel alloys; performance parameters; CASM-method; regression model; regression equation; service properties, technological weldability
 
Received:                22.11.17
Published:               16.01.18
 
 
References
1. Kablov, E.N. (2006) Cast high-temperature alloys. S.T. Kiskin effect. In: to 100th Anniversary of S.T. Kishkin. Ed. by Kablov. Moscow, Nauka [in Russian].
2. Kablov, E.N. (2007) 75 years. Aviation materials. Selected works of VIAM: Jubelee Sci.-Techn. Transact. Ed. by E.N. Kablov. Moscow, VIAM [in Russian].
3. Shalin, R.E., Svetlov, I.L., Kachanov, E.B. et al. (1997) Single crystals of nickel high-temperature alloys. Moscow, Mashinostroenie [in Russian].
4. Kishkin, S.T., Stroganov, G.B., Logunov, A.V. (1987) Cast high-temperature nickel-base alloys. Moscow, Mashinostroenie [in Russian].
5. Paton, B.E., Stroganov, G.B., Kishkin, S.T. et al. (1987) High-temperature strength of cast nickel alloys and their protection from oxidation. Kiev, Naukova Dumka [in Russian].
6. Kablov, E.N. (2001) Cast blades of gas-turbine engines (alloys, technology, coatings): State Scientific Center of Russian Federation. Moscow, MISIS [in Russian].
7. Sims, Ch.T., Stoloff, N.S., Hagel, U.K. (1995) Superalloys II: High-temperature materials for aerospace and industrial power units. Ed. by R.E. Shalin. Moscow, Metallurgiya [in Russian].
8. Koval, A.D., Belikov, S.B., Sanchugov, E.L., Andrienko, A.G. (1990) Scientific basics of alloying of high-temperature nickel alloys resistant to high-temperature corrosion (HTC). Zaporozhye Machine Building Institute [in Russian].
9. Nikitin, V.I. (1987) Corrosion and protection of gas turbine blades. Leningrad, Mashinostroenie [in Russian].
10. Khimushin, F.F. (1969) High-temperature alloys. Moscow, Metallurgiya [in Russian].
11. Du Pont, J.N., Lippold, J.C., Kiser, S.D. (2009) Welding metallurgy and weldability of nickel-base alloys. New Jersey, 298–326. https://doi.org/10.1002/9780470500262
12. Gajduk, S.V. (2015) Comprehensive analytical solution method procedure for design of cast high-temperature nickel-base alloys. Novi Materialy i Tekhnologii v Metalurgii ta Mashynobuduvanni, 2, 92–103 [in Russian].
13. Morinaga, M., Yukawa, N., Adachi, H., Ezaki, H. (1984) New PHACOMP and its application to alloy design. Superalloys, AIME, 523–532. https://doi.org/10.7449/1984/Superalloys_1984_523_532
14. Morozova, G.I. (2012) Compensation of disbalance of alloying of high-temperature nickel alloys. Metallovedenie i Termich. Obrab. Metallov, 12, 52–56 [in Russian].
15. Morozova, G.I. (1993) Balanced alloying of high-temperature nickel alloys. Metally, 1, 38–41 [in Russian].
16. Gajduk, S.V., Tikhomirova, T.V. (2015) Application of analytical methods for calculation of chemical composition of g-, g'-phases and parameters of phase stability of cast high-temperature nickel alloys. Kosmich. Tekhnika i Tekhnologiya, 126(9), 33–37[in Russian].
17. Gajduk, S.V., Kononov, V.V., Kurenkova, V.V. (2015) Construction of predictive mathematical models for calculation of thermodynamical parameters of cast high-temperature nickel alloys. Sovrem. Elektrometall., 4, 31–37 [in Russian]. https://doi.org/10.15407/sem2015.04.05
18. Gajduk, S.V., Kononov, V.V., Kurenkova, V.V. (2016) Regression models for predictive calculations of corrosion parameters of cast high-temperature nickel alloys. Ibid., 3, 51–56 [in Russian]. https://doi.org/10.15407/sem2016.03.08
19. Gajduk, S.V., Tikhomirova, T.V. (2015) Application of CALPHAD method for calculation of g'- phase and prediction of long-term strength of cast high-temperature nickel alloys. Metallurgicheskaya i Gornorudnaya Promyshlennost, 6, 64–68 [in Russian].
20. Saunders, N., Fahrmann, M., Small, C.J. (2000) The application of CALPHAD calculations to Ni-based superalloys. In: Superalloys 200 TMS, Warrendale, 803–811. https://doi.org/10.7449/2000/Superalloys_2000_803_811
21. Gajduk, S.V., Kononov, V.V., Kurenkova, V.V. (2015) Calculation of phase composition of cast high-temperature corrosion-resistant nickel alloy by CALPHAD method. Sovrem. Elektrometall., 3, 35–40 [in Russian]. https://doi.org/10.15407/sem2015.03.06
22. Vertogradsky, V.A., Rykova, T.P. (1984) Investigation of phase transformations in alloys of high-temperature type by DTA method. In: High-temperature and heat-resistant nickel-base steels and alloys. Moscow, Nauka, 223–227 [in Russian].
23. Gajduk, S.V., Belikov, S.B., Kononov, V.V. (2004) About influence of tantalum on characteristic points of high-temperature nickel alloys. Vestnik Dvigatelestroeniya, 3, 99–102 [in Russian].
24. Gajduk, S.V., Petrik, I.A., Kononov, V.V. (2015) Comparative investigations of weldability of cast high-temperature nickel alloys. Novi Materialy i Tekhnologii v Metalurgii ta Mashynobuduvanni, 1, 82–88 [in Russian].