Print

2019 №08 (06) DOI of Article
10.15407/tpwj2019.08.07
2019 №08 (01)


The Paton Welding Journal, 2019, #8, 43-48 pages
 
Journal The Paton Welding Journal
Publisher International Association «Welding»
ISSN 0957-798X (print)
Issue #8, 2019 (September)
Pages 43-48

Equipment and technologies of safe grinding of ferroalloys of electrode production

A.E. Marchenko


E.O. Paton Electric Welding Institute of the NAS of Ukraine 11 Kazimir Malevich Str., 03150, Kyiv, Ukraine. E-mail: office@paton.kiev.ua

The preferred types of equipment are considered to provide safe grinding of ferromaterials used in electrode production. The design features of the equipment, their advantages and disadvantages are described. 6 Ref., 8 Figures.
Keywords: electrode production, ferromaterials, fire and explosion safe grinding, slotted mill, vibration mill, paddle-type grinder, vibroinertial grinder

 
Received: 24.04.19
Published: 24.09.19
 
 

References

1. Nejkov, O.D., Marchenko, A.E., Nedin, V.V. et al. (1982) On problem of explosion hazard in grinding of ferroalloys. In: Proc. of All-Union Conf. on Welding Consumables. Ed. by I.K. Pokhodnya. Kiev, Naukova Dumka 167–172 [in Russian].
2. Vasilieva, G.I., Nejkov, O.D., Chernykh, A.M. et al. (1989) Supply of shielding gas media in installations of ferroalloys grinding. In: Proc. of 2nd Int. School of Countries-Members of CMEA on Metallurgical and Technological Problems of Basic Electrodes (Sofia, November 1989). Kiev, Naukova Dumka, 133–139.
3. Gajrabediyants, E.L., Betchin, V.A., Matveev, N.N. (1977) Technology and equipment of flow-line electrode manufacturing. In: Technology, organization of manufacturing and management. NII Informenergo [in Russian].
4. (2009) New frontiers. Grinding mills PALLA–UO in beneficiation. Gornaya Promyshlennost, 1 [in Russian].
5. Revkin, V.N., Girshov, V.L., Finkelshtejn, G.A. et al. (1982) Grinding of metal powders and chips. Poroshk. Metallurgiya, 4, 12–17 [in Russian].
6. Denisov, G.A., Ardelyan, A.A., Zarogatsky, L.P. (1989) Technology of grinding of ferroalloys with use of conical inertial crushing machine. In: Proc. of 2nd Int. School of Countries-Members of CMEA on Metallurgical and Technological Problems of Basic Electrodes (Sofia, November 1989). Kiev, Naukova Dumka, 140–146.