|2016 №10 (09)||DOI of Article
|2016 №10 (01)|
Avtomaticheskaya Svarka (Automatic Welding), #10, 2016, pp. 50-51
Influence of technological factors of microplasma spraying of TiO2 on the degree of spraying material utilization
Yu.S. Borisov, S.G. Vojnarovich, A.N. Kislitsa and S.N. Kalyuzhny
E.O. Paton Electric Welding Institute, NASU 11 Kazimir Malevich Str., 03680, Kiev, Ukraine. E-mail: email@example.com
The work is a study of the degree of the influence of technological parameters of microplasma spraying on the coefficient of material utilization during formation of a resistive coating from titania. Investigations were conducted with application of a multifactorial experiment with fractional replicas 24–1. As a result of processing of experimental data, a regression equation was derived, which allows assessment of the degree of the influence of microplasma spraying parameters, such as current, spraying distance, plasma gas flow rate and powder consumption on the value of the material utilization coefficient. It is established that current value has the greatest influence on it. During investigations it was shown that selection of the parameters of microplasma spraying of resistive paths from TiO2 powder will allow minimizing material losses. 4 Ref., 2 Tables.
Keywords: microplasma spraying, TiO2,material utilization coefficient, resistive heating element
- Anshakov, A.S., Kazanov, A.M., Urbakh, E.K. et al. (1998) Development of low-temperature heater by plasma cladding method. Fizika i Khimiya Obrabotki Materialov, 3, 56–61.
- Baklanov, D.I., Belyajkov, I.N., Virnik, A.M. et al. Method of manufacture of resistance heating element. Pat. 2066514 RF. Int. Cl. H 05 B 3/12. Moscow: In-te for High Temperatures. Fill. 14.09.1993. Publ. 10.09.1996.
- Ershov, A.A., Urbakh, E.K., Faleev, V.A. et al. (1995) Plasma cladding of resistive layers of electric tape. In: of Conf. on Physics of Low-Temperature Plasma. Petrozavodsk: PGU, 1995, Pt 3, 409–411.
- Borisov, Yu.S., Vojnarovich, S.G., Kislitsa, A.N. et al. (2013) Manufacture of resistance electrical heater by microplasma cladding process. The Paton Welding J., 9, 50–51.