Print

2019 №06 (07) DOI of Article
10.15407/as2019.06.08 		2019 №06 (09)

Automatic Welding 2019 №06


Avtomaticheskaya Svarka (Automatic Welding), #6, 2019, pp.51-54

Application of chips of steel 5KhNM in electroslag surfacing of dies in current-conducting mold

Yu.M. Kuskov, O.G. Kuzmenko, I.P. Lentyugov


E.O. Paton Electric Welding Institute of the NAS of Ukraine, 11. Kazimir Malevich Str., 03150, Kyiv, Ukraine. E-mail: office@paton.kiev.ua

Different methods for melting chips during electroslag process are considered. For electroslag surfacing of dies, chips of a tool steel were used as a discrete surfacing material in combination with a special device for melting of additive and formation of deposited layer, which is the current-conducting mold. The results of surfacing press dies with chips of steel 5KhNМ are presented. The prospects of the proposed technology for renovation of dies from the point of view of producing high-quality dying tool with a relatively low power consumption during surfacing works is shown. 9 Ref., 5 Fig.
Keywords: chips of a tool steel, electroslag surfacing, dies, current-conducting mold

Received: 04.03.2019
Published: 20.05.2019

References

1. Geller, Yu.A. (1983) Tool steels. Moscow, Metallurgiya [in Russian].
2. http://www.ukrstat.gov.ua/operativ/menu_u/ns.htm:State statistics service of Ukraine. Economic statistics. Economic activity. Environment [in Ukrainian].
3. Mazur, A.A., Lipodaev, V.N., Pustovojt, S.V., Petruk, V.S. (2017) State-of-the-art of welding equipment and consumables market in Ukraine. The Paton Welding J., 11, 31. https://doi.org/10.15407/tpwj2017.11.05
4. Kuskov, Yu.M. (2014) Discrete filler materials for surfacing in current-conducting mould. Ibid., 6-7, 97-102. https://doi.org/10.15407/tpwj2014.06.21
5. Kuzmenko, O.G. (2002) Restoration of tool for hot die forging by electroslag surfacing with noncompact materials: Syn. of Thesis for Cand. of Techn. Sci. Degree. Kiev, PWI [in Russian].
6. Davydov, A.K., Goncharov, A.E., Soloviov G.I., Marfitsin, V.V. (1997) Electroslag surfacing with graphite electrode. Svarochn. Proizvodstvo, 6, 47-48 [in Russian].
7. Baktagirov, F.K. (2003) Application of nonconsumable electrode electroslag process for melting, refining and treatment of metals. Report 2. Advances in Electrometallurgy, 1, 4-8.
8. Kochkin, S.V. (2015) Development of technology of metal chips processing by electroslag remelting method. Sovremennye Nauchnye Issledovaniya i Innovatsii, 6, 41 [in Russian].
9. Kyskov, Yu.M. (2003) A new approach to electroslag welding. Welding J., 4, 42-45.