Print

2021 №02 (07) DOI of Article
10.37434/as2021.02.08
2021 №02 (09)


Avtomaticheskaya Svarka (Automatic Welding), #2, 2021, pp. 47-51

Hygienic characteristics of air in the working zone during arc welding of copper and its alloys (Review)

O.M. Bezushko1, O.G. Levchenko2, T.B. Maidanchuk1, A.O. Lukyanenko1, O.M. Goncharova1


1E.O. Paton Electric Welding Institute of the NAS of Ukraine, 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine. E-mail: office@paton.kiev.ua 2National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute», 37 Peremohy Ave., 03056, Kyiv, Ukraine. E-mail: mail@kpi.ua

A literature review of harmful substances formed during arc welding of copper and its alloys is presented. Literature data on studying emissions of welding aerosols in welding of copper and copper alloys are considered. It is shown that to create new grades of welding materials that would satisfy not only their welding technology, but also sanitary and hygienic characteristics, it is necessary to continue the study of chemical composition and levels of emissions of welding aerosols using modern standardized international procedures. 13 Ref., 1 Tabl.
Keywords: copper, welding, brass, bronze, welding aerosol, harmful substances, toxicity


Received: 3.12.2020

References

1. Osintsev. O.E., Fedorov, V.N. (2004) Copper and copper alloys. National and foreign grades: Refer. book. Moscow, Mashinostroenie [in Russian].
2. Bykovskyi, O.G. (2011) Welding and cutting of nonferrous metals: Refer. book. Kyiv, Osnova [in Ukrainian].
3. Zaks, I.A. (1999) Electrodes for arc welding of nonferrous metals and alloys. Saint-Petersburg, Strojizdat [in Russian].
4. Levchenko, O.G., Lukianenko, A.O., Demetska, O.V., Arlamov, O.Y. (2018) Influence of composition of binder of electrodes coating on cytotoxicity of welding aerosols. Mat. Sci. Forum, 927, 86-92. https://doi.org/10.4028/www.scientific.net/MSF.927.86
5. (2011) DSTU ISO 15011-4:2008. Health and safety in welding and allied processes. Laboratory method for sampling aerosols and gases. Pt 4: Form for recording data on aerosols. Ed. by O.Bezushko, Yu. Bondarenko et al. Valid from 2008.08.15. Kyiv, Derzhspozhyvstandart Ukrainy [in Ukrainian].
6. (1979) GOST 859-2014: Copper. Grades. Valid from 1979.01.01. Group V51. Moscow, Interstate standard [in Russian].
7. (2020) Hygiene chemicals regulations in the air of the working zone. Law 1596 of 14.07.2020, Ministry of Health of Ukraine. URL:https://zakon.rada.gov.ua/laws/show/z0741-20#Text.
8. Ponomarenko, O.I., Shinsky, I.O., Morgun, N.N. (2004) Casting by consumable patterns of bronze alloys. Litejnoe Proizvodstvo, 11, 30 [in Russian].
9. Ponomarenko, O.I., Lysenko, T.V., Stanovsky, A.L., Shinsky, O.I. (2012) Control of casting systems and processes. Kharkov, NTU KhPI [in Russian].
10. Majdanchuk, T.B., Skorina, N.V. (2014) Improvement of adaptability to fabrication and welding properties of electrodes for tin bronze welding and surfacing. The Paton Welding J., 6-7, 176-181. https://doi.org/10.15407/tpwj2014.06.37
11. Ilyushenko, V.M., Anoshin, V.A., Skorina, N.V., Majdanchuk, T.B. (2013) Selection of slag-forming base of electrode coating for arc welding and surfacing of cast tin bronzes. In: Proc. of 7th Sci.-Techn. Conf. of Young Scientists and Specialists on Welding and Related Technologies (22-24 May 2013, Kiev, Ukraine). Kiev, PWI, 155.
12. Ilyushenko, V.M., Anoshin, V.A., Bondarenko, A.N. et al. (2013) Development of electrode materials for welding and surfacing of complexly-alloyed bronzes. In: Proc. of Abstracts of Int. Conf. on Welding and Related Technologies - Present and Future (25-26 November 2013, Kiev. Ukraine). Kiev, PWI, 72-73.
13. Skorina, N.V., Kisilev, M.O., Paltsevich, A.P., Levchenko, O.G. (2011) Properties of lithium-containing liquid glasses for production of welding electrodes. In: Proc. of 4th Int. Conf. on Welding Consumables of CIS countries. Krasnodar, pp. 75-82.

Advertising in this issue: