Print

2021 №03 (05) DOI of Article
10.37434/as2021.03.06
2021 №03 (07)


Avtomaticheskaya Svarka (Automatic Welding), #3, 2021, pp. 35-39

Improvement of the surfacing technology for large backup rolls of hot rolling mills

L.K. Leshchinskiy, V.M. Matviyenko, V.P. Ivanov, K.K. Stepnov, E.I. Vozyanov


Azov State Technical University, 7 Universitetskaya Str., 87555, Mariupol, Ukraine. E-mail: matviyenkovn@gmail.com

It is shown that when surfacing large backup rolls of hot rolling mills made of 90CrV steel, the limited weldability of steel leads to the need to select the thermal mode of surfacing that ensures the required operability of the deposited layer. The choice of materials and technology of surfacing the transition zone from the base metal to the working layer determines appearance of hardness dips and formation of a «soft sub-layer», which leads to occurrence of spallation. Elimination of such dips depends on the choice of the deposition mode of each of the layers, in accordance with the composition and size of the electrodes used. It is shown that application of a 1.0 mm thick strip electrode from 08kp, 30KhGSA, 25Kh5FMS steels for surfacing makes it possible to obtain a smooth (without dips and bursts) change in hardness along the height of the multilayer composition, which contributes to an increase in spalling resistance when the height of the deposited layer decreases during the operation of the roll. The high efficiency of the surfaced backup rolls was confirmed during industrial development of the surfacing technology of the rolls and their long-term operation in the hot rolling mill, The developed and implemented routing scheme for movement of the deposited and new backup rolls (the share of deposited rolls reached 30%) in the roughing group of stands of mill 2000 of the Cherepovets Metallurgical Plant made it possible to ensure the operating time of surfaced rolls commensurate with that of new rolls as to the tonnage of rolled products. 12 Ref., 4 Tabl., 2 Fig.
Keywords: backup rolls, 90CrV steel, surfacing, underlayer, transition zone, composition of layers, hardness, spalling of the surfaced layer, strip electrode, surfacing mode, hot rolling mill, roughing stand, roll route, operating time of surfaced rolls


Received: 02.02.2021

References

1. Ryabtsev, I.A., Kondratiev, I.A., Vasiliev, V.G. et al. (2010) Investigation of structure and service properties of deposited metal for reconditioning and strengthening of rolling mill rolls. The Paton Welding J., 7, 12-15.
2. Balakleets, I.A., Filippov, V.S., Shebanits, E.N. et al. (2012) Current trends in the manufacture and operation of rolls. Metall i Lityo Ukrainy, 2, 50–54 [in Russian].
3. Gostev, K.A. (2008) Modern rolls at rolling mills 2000 of Cherepovetsky and Magnitogorsky Iron and Steel Works. Меtаllurg, 9, 52-55 [in Russian]. https://doi.org/10.1007/s11015-009-9088-5
4. Danilov, L.I., Skorokhvatov, N.B., Sobolev, V.F. et al. (2004) Increase of the service life of the back-up rolls of a 2000 hot strip mill at JSC «Severstal». Chyornaya Metallurgiya, 8, 68–69 [in Russian].
5. Samotugin, S.S., Leshchinskiy, L.K., Mazur, V.А., Samotugina, Yu.S. (2013) Tool materials. Properties and hardening. Mariupol, PSTU [in Russian].
6. Gulakov, S.V., Nosovskiy, B.I. (2005) Surfacing of working layer with the regulated distribution of properties. Mariupol, PSTU [in Russian].
7. Leshchinskiy, L.K., Gulakov, S.V., Nosovskiy, B.I., Stepnov, K.K. (1977) Causes of fracture of the deposited working layer of back-up rolls. Avtomatich. Svarka, 3, 19–23 [in Russian].
8. Kostin, V.A. (2012) Mathematical formulation of carbon equivalent as a criterion for evaluation of steel weldability. The Paton Welding J., 8, 11-16.
9. Leshchinsky, L.K., Samotugin, S.S., Pirch, I.I., Komar, V.I. (1990) Plasma surface hardening. Кiev, Теkhnika [in Russian].
10. Ryabtsev, I.A., Babinets, A.A., Gordan, G.N. et al. (2013) Structure of multilayer samples, simulating surfaced tools for hot deforming of metals. The Paton Welding J., 9, 41–45.
11. Gajvoronsky, A.A., Poznyakov, V.D., Markashova L.I. et al. (2012) Influence of deposited metal composition on structure and mechanical properties of the reconditioned railway wheels. Ibid., 8, 16-22.
12. Leshchinsky, L.K., Ivanov, V.P., Маslov, А.А. (1997) Strip electrode for hardfacing. Pat. 2087589 RU, Int. Cl. В23К020/227 [in Russian].

Advertising in this issue: