Print

2022 №04 (05) DOI of Article
10.37434/tdnk2022.04.06
2022 №04 (01)


Technical Diagnostics and Non-Destructive Testing #4, 2022, pp. 41-46

Mechanical properties of metal of critically thinned sections of heat pipelines and features of their destruction

P.S. Yukhymets1, R.I. Dmytrienko1, O.L. Palienko1, V.M. Yehorenko2

1E.O. Paton Electric Welding Institute of NASU. 11 Kazymyr Malevych str., 03150, Kyiv, Ukraine. E-mail: office@paton.kiev.ua
2JV «Kyivteploenergo». 5, Ivan Franko sq., 01001, Kyiv, Ukraine. E-mail: yehorenko.vm@kte.kmda.gov.ua

A comparison of mechanical test results of a pipe metal was conduced depending on the type of sample, the accumulated residual strain and the method of its determination. A comparative assessment of heat pipe strength in the presence of a critically thinned area was performed based on the criteria of static and low-cycle strength. The obtained results proved that changes in the properties of strength and plasticity characteristics of critically thinned areas revealed during mechanical testing contribute to an increase in the probability of low-cycle destruction of the heat pipeline with larger residual thickness. Satisfactory result of periodic hydraulic tests does not exclude the possibility of heat pipeline destruction during the next heating season due to the increase in metal damage of critically thinned areas caused by significant fluctuations of operating pressure. Proposals are provided for determination of hydraulic test pressure of heat pipelines. 17 Ref., 2 Tabl., 8 Fig.
Keywords: heat pipeline, metal mechanical properties, low-cycle strength, hydraulic test

Received: 26.08.2022

References

1. (2003) GKD 34.20.507. Technical operation of power plants and networks. Rules [in Ukrainian].
2. (1994) GKD 34.20.504. Heating networks. Operating manual [in Ukrainian].
3. (2007) Ministry of Fuel and Energy, order No. 71. Rules for the technical operation of heating equipment and networks [in Ukrainian].
4. (1998) DNAOP 0.00-1.11. Rules for the construction and safe operation of steam and hot water pipelines [in Ukrainian].
5. (2017) Kyivenergo instruction No. 29. Testing of heat networks for hydraulic leak tightness [in Ukrainian].
6. Dmytrienko, R.I., Yukhymets, P.S., Torop, V.M., Kysil, I.N., Yehorenko, V.N. (2020) Damageability and effectiveness of conducting hydraulic testing of heating systems of Kyiv city. Tekh. Diahnost. ta Neruiniv. Kontrol, 1, 37-44 [in Ukrainian] https://doi.org/10.37434/tdnk2020.01.04
7. Steklov, O.I. (1998) Monitoring and prediction of the service life of welded structures taking into account their aging and corrosion. In: Proc. of Int. Conf. on Welding and Related Technologies for 21st century (Kyiv, Ukraine, 24-27 November, 1998), PWI, 99-109.
8. Pleshivtsev, V.G., Pak, Yu.A., Filippov, G.A. (2008) Factors that reduce the structural strength of pipe metal and the prospects for creating new pipe steels for heating networks. In: Proc. of 3rd Sci.-Pract. Conf. on Heat Networks. Modern Practical Solutions. www.rosteplo.ru/Tech_stat/stat_shablon.php?id=2076
9. Pleshivtsev, V.G., Filippov, G.A., Pak, Yu.A., Livanova, O.V. (2009) Influence of carbon content and stress state on the corrosion rate of pipe steel in heat networks. Metallurg, 8, 22-25 [in Russian]. https://doi.org/10.1007/s11015-009-9188-2
10. (1991) GOST 10704 Longitudinally welded steel pipes. Grades [in Russian].
11. Yukhymets, P.S., Nyrkova, L.I., Gopkalo, O.P., Dmytrienko, R.I., Lytvynenko, A.Ye., Palienko, O.L. (2022) Features of corrosion of heat pipelines made of steel 17G1S. Fiz.-Chimich. Mekhanika Materialiv, 1, 35-40 [in Ukrainian]. https://doi.org/10.1007/s11003-022-00627-5
12. (1989) GOST 19281 High-strength rolled steel. General specifications [in Russian].
13. Garber, K.E. (2008) Influence of stresses on the development of corrosion processes in pipelines of Sistemenergo Ltd. Metallurgical Enterprise [in Russian]. http://www.energosovet. ru/stat463.html
14. (2009) ISO 6892-1 Tensile testing - Pt. 1: Method of test at room temperature.
15. (2014) ISO 6506 Metallic materials - Brinell hardness test - Pt. 1: Test method.
16. (2015) SOU NAEK 087:2015. Method of determination of metal mechanical properties by hardness measurement [in Ukrainian].
17. Kogaev, V.P., Makhutov, N.A., Gusenkov, A.P. (1985) Calculations of machine parts and structures for strength and durability. Moscow, Mashinostroenie [in Russian].

Advertising in this issue: