| 2000 №11 (09) | 2000 №11 (11) |
The Paton Welding Journal, 2000, #11, 46-49 pages
Effect of method of wear-resistant surfacing on the distribution of a strengthening phase in deposited metal
V.A. Bagrov, V.N. Kalianov
Ukrainian Engineering-Pedagogical Academy, Kharkov, UkraineAbstract
Peculiarities of effect of the method of surfacing on distribution of a strengthening phase in height of the deposited metal depending on endogeneous or exogeneous nature of its formation are considered. It was established experimentally that the application of surfacing with a dead filler "levels" the distribution of strengthening phases and stabilizes the characteristics of wear resistance and microhardness of the deposited metal.
Keywords: surfacing, flux-cored wire, endo- and exogeneous carbides, wear resistance
References
1. Garkunov, D.N. (1985) Tribotechnique. Moscow. Mashinostroyeniye.2. Eyre, T.S. (1979) Wear resistance of metals. Treatise on Materials Science and Technology, 13, 363 - 442.
3. Livshits, L.S. (1991) Surfacing materials and technology of surfacing for increase in wear resistance and restoration of machine parts. Svarochnoye Proizvodstvo, 1,
4. Paton, B.E. (1998) Problems of welding at the threshold of centuries. In: Proc, of Int. Conf, on Welding and Related Technologies to the XXI Century. Kyiv: PWI.
5. Kalianov. V.N. (1997) Structure and characteristics of wear-resistant sparsely-alloyed deposited metal. Svarochnoye Proizvodstvo, 4, 13-17.
6. Lepinskikh, B.M., Vostryakov, A.A. (1978) Dissolution of solid phases on metallurgical melts. Moscow: Nauka.
7. Snagovsky, L.M., Snagovsky, V.M., Taran, Yu.N. et al. (1976) Crystallization of eutectics on phase of niobium and titanium carbides in iron alloys. In: Carbides and alloys on their base. Kyiv: Naukova Dumka.
8. Kakovkin, O.S., Darakhvelidze, Yu.D., Starchenko, G.G. (1989) Peculiarities of alloying of deposited metal with titanium carbide in arc wear-resistant surfacing. Svarochnoye Proizvodstvo, 5, 41 - 42.
9. Pilyushenko, V.L., Vinokur, B.B., Kondratyuk, S.E. et al. (1984) Handbook on practical metals science. Kyiv: Tekhnika.
10. Danilchenko, B.V. (1992) Selection of wear-resistant deposited metal for operation in the conditions of abrasive wear. Svarochnoye Proizvodstvo, 5, 31 – 32.