Print

2019 №06 (05) DOI of Article
10.15407/tpwj2019.06.06
2019 №06 (07)


The Paton Welding Journal, 2019, #6, 34-37 pages

Journal The Paton Welding Journal
Publisher International Association «Welding»
ISSN 0957-798X (print)
Issue #6, 2019 (June)
Pages 34-37

Filler flux-cored wire for tig welding and surfacing of VT22 titanium alloy

S.V. Akhonin and S.L. Schwab


E.O. Paton Electric Welding Institute of the NAS of Ukraine 11 Kazimir Malevich Str., 03150, Kyiv, Ukraine. E-mail: office@paton.kiev.ua

The paper considers an approach for selection of filler material in TIG welding of VT22 titanium alloy. It is shown that weld metal produced using pilot flux-cored wire PPT-22 is a representative of transient class of titanium alloys, to which VT22 alloy is referred (coefficient of β-stabilizing of such metal equals to 1). This wire can be used for argon-arc welding of high-strength VT22 titanium alloys. Mechanical properties of such welded joints after heat treatment reach the level of base metal indices. Application of PPT-22 wire in restoration argon-arc surfacing of VT22 alloy parts provides their high service characteristics. 15 Ref., 4 Tables, 5 Figures.
Keywords: VT22 titanium alloy, flux-cored wire, TIG welding, restoration surfacing


Received: 18.04.19
Published: 20.06.19


References

1. Moiseev, V.N. (2001) Machine-building: Encyclopedia. Vol. II-3: Nonferrous metals and alloys. Ed. by I.N. Fridlyander. Chapter 2: Titanium and titanium alloys [in Russian].
2. Belov, S.P., Brun, M.Ya., Glazunov, S.G. (1992) Metallurgy of titanium and its alloys. Ed. by S.G. Glazunov, B.A. Kolachev. Moscow, Metallurgiya [in Russian].
3. Iliin, A.A., Kolachev, B.A., Polkin, I.S. (2009) Titanium alloys. Composition, structure, properties. Moscow, VILS MATI [in Russian].
4. Chechulin, B.B., Ushkov, S.S., Razuvaeva, I.N., Goldfajn, V.N. (1977) Titanium alloys in machine-building. Leningrad, Mashinostroenie [in Russian].
5. Kolachev, B.A., Polkin, I.S., Talalaev, V.D. (2000) Titanium alloys of different countries. Moscow, VILS [in Russian].
6. Kolachev, B.A., Elagin, V.I., Livanov, V.A. (2005) Metallurgy and heat treatment of nonferrous metals and alloys. Moscow, MISIS [in Russian].
7. Borisova, E.A., Bochvar, G.A., Brun, M.Ya. (1980) Metallography of titanium alloys. Moscow, Metallurgiya [in Russian].
8. Khorev, A.I., Belov, S.P., Glazunov, S.G. (1992) Metallurgy of titanium and its alloys. Moscow, Metallurgiya [in Russian].
9. Prilutsky, V.P., Shvab, S.L., Akhonin, S.V. et al. (2014) Comparative properties of filler materials for surfacing on titanium alloy VT22. In: Proc. of Int. Conf. on Titanium 2014 in CIS (Russia, Nizhny Novgorod, May 2014), 109-114.
10. Prilutsky, V.P., Zamkov, V.M., Radkevich, I.A., Nikiforov, G.A. (1998) Filler material based on titanium alloy. Ukraine, Pat. 25333. Int. Cl. A B23K 35/36 [in Ukrainian].
11. Prilutsky, V.P., Zamkov, V.N., Gurevich, S.M. (1975) Argonarc welding of titanium alloys with application of filler fluxcored wire. Avtomatich. Svarka, 7, 41-44 [in Russian].
12. Prilutsky, V.P., Akhonin, S.V., Schwab, S.L., Petrychenko, I.K. (2018) Effect of heat treatment on the structure and properties of titanium alloy VT22 welded joints produced by TIG-welding with flux-cored wire. Mat. Sci. Forum, 927, 119-125. https://doi.org/10.4028/www.scientific.net/MSF.927.119
13. Prilutsky, V.P., Akhonin, S.V., Schwab, S.L. et al. (2017) Restoration surfacing of parts of titanium alloy VT22. The Paton Welding J., 1, 32-35. https://doi.org/10.15407/tpwj2017.01.05
14. Antonyuk, S.L., Abolikhina, E.V., Barannikov, A.M. et al. (2010) Fatigue characteristics of titanium alloy VT22 with argon-arc surfacing and subsequent high-speed heat treatment. In: Proc. of Int. Conf. on Titanium-2010 in CIS (Russia, Ekaterinburg, May 2010), 206-211.
15. Ivasishin, O.M., Markovsky, P.E., Molyar, A.G., Antonyuk S.L (2009) Application of local induction heat treatment for repair of products from VT22 alloy. In: Proc. of Int. Conf. on Titanium-2009 in CIS (Ukraine, Odessa, May 2009), 413-421.