The Paton Welding Journal, 2019, №06



2019 №06 (06)

DOI of Article 10.15407/tpwj2019.06.07

2019 №06 (08)

---

The Paton Welding Journal, 2019, #6, 38-42 pages

Journal The Paton Welding Journal
Publisher International Association «Welding»
ISSN 0957-798X (print)
Issue #6, 2019 (June)
Pages 38-42

Effect of temperature on hardness and wear resistance of high-chromium cast irons deposited with flux-cored strips

A.P. Voronchuk, A.P. Zhudra, A.V. Petrov and V.O. Kochura

E.O. Paton Electric Welding Institute of the NAS of Ukraine 11 Kazimir Malevich Str., 03150, Kyiv, Ukraine. E-mail: office@paton.kiev.ua

The paper presents the procedure and results of investigation of hot hardness of the deposited high-chromium cast irons with different level of alloying of 450Kh30M, 500Kh22B7, 500Kh22B7M7V2F, 300Kh25S3N2G2 type, as well as nickel-chromium-carbide alloy 500Kh40N40S2GRTs. It is determined that hot hardness of deposited metal to a significant extent depends on the presence and types of carbides in metal structure. For relatively low-alloyed high-chromium cast irons, hardness drops at temperature rise and increases at the content of chromium up to 30 % and that of carbon up to 5 %. Alloys doped with chromium, niobium, molybdenum, tungsten and vanadium preserve high hardness up to 650 °C temperature. Niobium is important for indicated alloys. It plays a role of modifier delaying growth of primary chromium carbides, and forming hard cubic niobium carbide. Nickel-chromium-carbide alloy preserves high hardness up to 650 °C temperature due to the presence of high concentration of higher chromium carbides in a nickel-based matrix. Wear resistance of deposited alloys decreases with the rise of temperature in accordance with lowering of deposited metal hardness. 12 Ref. 3 Tables, 3 Figures.
Keywords: hot hardness, flux-cored strips, surfacing, high-chromium cast irons, nickel-carbide-chromium alloy, wear resistance


Received: 12.04.19
Published: 20.06.19

References

1. (1978) Welding in machine-building: Refer. book, 4 Vol. Ed. by A.I. Akulov. Moscow, Mashinostroenie, Vol. 2 [in Russian].
2. Zhudra, A.P., Voronchuk, A.P. (2012) Cladding flux-cored strips (Review). The Paton Welding J., 1, 34-38.
3. Ryabtsev, I.A., Senchenkov, I.K., Turyk, E.V. (2015) Surfacing, materials, technologies, mathematical modeling. Wydawnictwo politechniki slaskiej, Gliwice, 362-365, 398-406 [in Polish].
4. Aleksyuk, M.M., Borisenko, V.A., Krashchenko, V.P. (1980) Mechanical tests at high temperatures. Kiev, Naukova Dumka [in Russian].
5. Borisenko, V.O., Oksametnaya, O.B. (1994) DSTU 2434-94: Calculations and strength tests. Method of determination of high-temperature hardness by indentation of pyramidal and bicylindrical indentor. Kiev, Gosstandart Ukrainy [in Russian].
6. Borisenko, V.A. (1975) General regularities in change of mechanical properties of refractory materials depending on temperature. Information 1. Problemy Prochnosti, 8, 58-63 [in Russian]. https://doi.org/10.1007/BF01522400
7. Rumshinsky, L.Z. (1971) Mathematical processing of results of experiment. Moscow, Nauka [in Russian].
8. Khansen, M., Anderko, K. (1962) Structures of binary alloys. Vol. 1, 2. Moscow, Metallurgizdat [in Russian].
9. Ivanko, A.A. (1968) Hardness. Kiev, Naukova Dumka [in Russian].
10. Gallo, C., Hubert, M. (1980) Soudage et Techniques Connexes, 34(11, 12), 371-386.
11. Schramm, H. (1984) Chrom-Niob-legierte Hartlegierungen fuer das Auftragschweissen. Ind.-Anz., 86, 75 [in German].
12. Zhudra, A.P. (2014) Investigation of wear resistance of composite alloys under the conditions of gas-abrasive wear at elevated temperatures. The Paton Welding J., 11, 28-31. https://doi.org/10.15407/tpwj2014.11.05

---

Suggested Citation

A.P. Voronchuk, A.P. Zhudra, A.V. Petrov and V.O. Kochura (2019) Effect of temperature on hardness and wear resistance of high-chromium cast irons deposited with flux-cored strips. The Paton Welding J., 06, 38-42.

---