Print

2019 №07 (04) DOI of Article
10.15407/tpwj2019.07.05 		2019 №07 (06)

The Paton Welding Journal 2019 №07


The Paton Welding Journal, 2019, #7, 21-24 pages
 
Journal The Paton Welding Journal
Publisher International Association «Welding»
ISSN 0957-798X (print)
Issue #7, 2019 (July)
Pages 21-24

Plasma-arc brazing of steel 08kp (rimmed) by using brazing filler metals OF Cu–Mn–Ni–Si system

S.V. Maksymova and I.V. Zvolinskyy


E.O. Paton Electric Welding Institute of the NAS of Ukraine 11 Kazimir Malevich Str., 03150, Kyiv, Ukraine. E-mail: office@isi@nas.ua

The paper presents the results of high-temperature differential thermal analysis of brazing filler metals based on Cu–Mn–Ni–Si system, metallographic examination of brazed joints of 08kp steel, made with application of plasma-arc heating. It is shown that at silicon alloying of Cu–Mn–Ni system the alloy melting temperature decreases and its wetting ability increases. X-Ray microanalysis revealed that brazed weld of 08kp steel joints consists of copper-based solid solution and dispersed precipitates of a silicon-enriched phase. An iron-based phase with higher concentration of silicon and manganese is formed on brazing filler metal–base metal interphase as a thin band (along the brazed weld), that is indicative of appearance of silicides of a complex composition. Brazed joint strength becomes higher with increase in nickel concentration in the alloy and is equal to 367 MPa (average value). 9 Ref., 2 Tables, 6 Figures.
Keywords: plasma-arc brazing, brazing filler metal, microstructure, spreading, solidus and liquidus temperature, strength

 
Received: 22.04.19
Published: 24.07.19
 
 

References

1. Knopp, N., Killing R. (2003) Hartlöten verzinkter Feinbleche mit dem Lichtbogen - sicher und wirtschaftlich (Teil 1). Solingen. Der Praktiker, 12, 366-371 [in German].
2. Füssel, U., Schetzsche, V., Sziesb, U., Husner, J. (2002) Plasmalöten mit stromführendem Zusatzwerkstoff. Ibid., 10, 336-340 [in German].
3. Kallabis, M., Schwankhart, G. (2002) Plazmatron-technologie im Karosseriebau. Blech Rohre Profile, 4, 42-45 [in German].
4. Pugh, C. (1970) Die Verwendung von Ni-Mn-Lotes fur Plattierlotungen sowie das Verfahren zum Herstellen eines solchen Lotes. FRG, Pat. 1284262 [in German].
5. Zhang, Q.K., Pei Yinyin, Weimin Long (2013) Investigations on formation mechanisms of brazing cracks at the austenitic stainless steel/filler metal brazing joint interfaces. Acta Metallurgica Sinica - Chinese Edition, 49(10), 1177-1184, October 2013, DOI: 10.3724/SP.J.1037.2013.00219 https://doi.org/10.3724/SP.J.1037.2013.00219
6. Davis, J.R. (Ed.) ASM Specialty Handbook. Copper and Copper Alloys, 276-302, DOI: 10.1361/caca P276.
7. Sejč, P., Kubíček, R. (2015) MIG brazing of 304L type stainless steel using CuSi3 and CuSi3MnAl brazing wire. Kovove Mater., 53, 365-375, DOI: 10.4149/km 2015 5 365. https://doi.org/10.4149/km_2015_5_365
8. Jyrki Miettinen. (2003) Thermodynamic description of the Cu-Mn-Ni system at the Cu-Ni side. Calphad 27(2), 147-152, June 2003. https://doi.org/10.1016/j.calphad.2003.08.003
9. (1997) State diagrams of binary metallic systems. Ed. by N.P. Lyakishev. In: Refer. Book, 3 Vol., Vol. 2. Moscow, Mashinostroenie [in Russian].