The Paton Welding Journal, 2019, №07



2019 №07 (03)

DOI of Article 10.15407/tpwj2019.07.04

2019 №07 (05)

---

The Paton Welding Journal, 2019, #7, 18-20 pages
 
Journal The Paton Welding Journal
Publisher International Association «Welding»
ISSN 0957-798X (print)
Issue #7, 2019 (July)
Pages 18-20

Efficiency of application of filler metal cored wire in TIG welding of copper

V.M. Ilyushenko, A.N. Bondarenko, E.P. Lukiyanchenko and T.B. Majdanchuk

E.O. Paton Electric Welding Institute of the NAS of Ukraine 11 Kazimir Malevich Str., 03150, Kyiv, Ukraine. E-mail: office@paton.kiev.ua

The experience of the E.O. Paton Electric Welding Institute in creating a metal cored wire for helium arc TIG welding of copper and its alloys was described. The deposited metal of the wire contains not more than 0.35 wt.% of alloying additives and is characterized by a high electrical and heat conductivity. Examples of the effective use of the developed wire in welding rotors of electric machines and in repair of gas-oxygen copper chambers of arc steel melting furnaces are given. 2 Ref., 4 Figures.
Keywords: TIG welding, helium shielding, copper and copper alloys, metal cored wire, electrical and heat conductivity, efficiency of application

 
Received: 24.04.19
Published: 24.07.19
 
 

References

1. Ilyushenko, V.M., Lukiyanchenko, E.P. (2013) Welding and surfacing of copper and alloys on its base. Kiev, IAW [in Russian].
2. Nikolaev, A.K., Kostin, S.A. (2012) Copper and heat resistant alloys. Encyclopedic and terminological dictionary: Fundamental Refer. Book. Moscow [in Russian].

---

Suggested Citation

V.M. Ilyushenko, A.N. Bondarenko, E.P. Lukiyanchenko and T.B. Majdanchuk (2019) Efficiency of application of filler metal cored wire in TIG welding of copper. The Paton Welding J., 07, 18-20.

---