Eng
Ukr
Rus
Print
2019 №07 (03) DOI of Article
10.15407/as2019.07.04
2019 №07 (05)

Automatic Welding 2019 #07
Avtomaticheskaya Svarka (Automatic Welding), № 7, 2019 г., с.24-27

Efficiency of application of filler metal-cored wire in TIG welding of copper

V.M. Ilyushenko, A.N. Bondarenko, E.P. Lukyanchenko, T.B. Maydanchuk
E.O. Paton Electric Welding Institute of the NAS of Ukraine. 11 Kazimir Malevich Str., 03150, Kyiv, Ukraine. E-mail: office@paton.kiev.ua

The experience of the E.O. Paton Electric Welding Institute in creating a metal-cored wire for helium arc TIG welding of copper and its alloys was described. The deposited metal of the wire contains not more than 0.35 wt. % of alloying additives and is characterized by a high electrical and heat conductivity. Examples of the effective use of the developed wire in welding rotors of electric machines and in repair of gas-oxygen copper chambers are given. 2 Ref., 4 Fig.
Keywords: TIG welding, helium protection, copper and copper alloys, metal-cored wire, electrical and heat conductivity, efficiency of application

Received: 24.04.2019
Published: 10.06.2019

References

1. Ilyushenko, V.M., Lukianchenko, E.P. (2013) Welding and surfacing of copper and alloys on its base. Kiev, IAW [in Russian].
2. Nikolaev, A.K., Kostin, S.A. (2012) Copper and heat-resistant alloys. Encyclopedic and terminological dictionary: Fundamental refer. book. Moscow [in Russian].

>