Print

2020 №01 (04) DOI of Article
10.37434/tpwj2020.01.05
2020 №01 (06)


The Paton Welding Journal, 2020, #1, 37-42 pages
 
Journal                    The Paton Welding Journal
Publisher                 International Association «Welding»
ISSN                      0957-798X (print)
Issue                       #1, 2020 (February)
Pages                      37-42

Impact of high-frequency peening and moderate climate atmosphere on cyclic fatigue life of tee welded joints with surface fatigue cracks

V.V. Knysh, S.O. Solovei, L.L. Nyrkova, A.O. Gryshanov and V.P. Kuzmenko


E.O. Paton Electric Welding Institute of the NAS of Ukraine 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine. E-mail: office@paton.kiev.ua

The paper presents the results of investigations of the effectiveness of application of the technology of high-frequency mechanical peening to improve the residual fatigue life of tee welded joints of 15KhSND steel with surface fatigue cracks and corrosion damages characteristic for structures after long-term service under the conditions of moderate climate of the central regions of Ukraine. Corrosion damages on the surface of joints were obtained by exposure in G4 hydrostat at higher temperature and relative humidity of air for 1200 h. It was experimentally established that strengthening of tee welded joints with surface fatigue cracks of up to 10 mm length and characteristic fatigue damages by the technology of high-frequency mechanical peening increases their cyclic fatigue life by up to 10 times. It is shown that application of the technology of high-frequency mechanical peening of welded joints, which contain fatigue cracks of 20 mm and greater length, does not lead to improvement of cyclic fatigue life and is not effective. 10 Ref., 2 Tables, 5 Figures.
Keywords: tee welded joint, corrosive environment, fatigue, accelerated corrosion testing, high-frequency mechanical peening, improvement of cyclic fatigue life
 
Received:                06.11.19
Published:               21.02.20

References

1. Kudryavtsev, Y., Kleiman, J., Lugovskoy, A. et al. (2007) Rehabilitation and repair of welded elements and structures by ultrasonic peening. Welding in the Word, 51(7-8), 47-53. https://doi.org/10.1007/BF03266585
2. Vilhauer, B., Bennett, C.R., Matamoros, A.B., Rolfe, S.T. (2012) Fatigue behavior of welded coverplates treated with ultrasonic impact treatment and bolting. Engineering Structures, 34(1), 163-172. https://doi.org/10.1016/j.engstruct.2011.09.009
3. Abston, S. (2010) The technology and applications of ultrasonic impact technology. Australasian Welding J., 55, 20-21.
4. Kuhlmann, U., Dürr, A., Günther, P. et al. (2005) Verlängerung der lebensdauer von schweißkonstruktion aus höher festen baustählen durch Anwendung der UIT-technologie. Schweißen und Schneiden, 57(8), 384-391.
5. Knysh, V.V., Osadchuk, S.O., Solovei, S.O. et al. (2019) Procedure of accelerated corrosion testing for modeling the long-term effect of moderate climate atmosphere on welded joints. The Paton Welding J., 11, 44-48. https://doi.org/10.15407/tpwj2019.11.08
6. Turnbull, A., Rios, E.R., Tait, R.B. et al. (1998) Improving the fatigue crack resistance of waspaloy by shot peening. Fatigue & Fracture of Engineering Materials & Structures, 21, 1513-1524. https://doi.org/10.1046/j.1460-2695.1998.00125.x
7. Song, P.S., Wen, C.C. (1999) Crack closure and crack growth behavior in shot peened fatigue specimen. Engineering Fracture Mechanics, 63, 295-304. https://doi.org/10.1016/S0013-7944(99)00010-7
8. Branko, C.M., Infante, V., Bartista, R. (2004) Fatigue behavior of the welded joints with cracks, repaired by hammer peening. Fatigue Fract. Engng. Mater. Struct., 27, 785-798. https://doi.org/10.1111/j.1460-2695.2004.00777.x
9. Farrahi, G.H., Majzoobi, G.H., Hosseinzadeh, F., Harati, S.M. (2006) Experimental evaluation of the effect of residual stress field on crack growth behaviour in C(T) specimen. Eng. Fract. Mech., 73, 1772-1782. https://doi.org/10.1016/j.engfracmech.2006.03.004
10. Knysh, V.V., Kuzmenko, A.Z, Solovej, A.S. (2009) Increase of cyclic fatigue life of tee welded joints with surface cracks. The Paton Welding J., 1, 29-33.