Print

2020 №09 (01) DOI of Article
10.37434/tpwj2020.09.02
2020 №09 (03)


The Paton Welding Journal, 2020, #9, 14-18 pages

Impact of thermal cycles of welding on formation of the structure and properties of corrosion-resistant steel 06G2BDP

A.V. Zavdoveev1, V.D. Poznyakov1, S.L. Zhdanov1, M. Rogante2, A.O. Maksymenko1, O.G. Sineok1 and A.M. Gerasymenko1


lE.O. Paton Electric Welding Institute of the NAS of Ukraine 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine. E-mail: office@paton.kiev.ua
2Rogante Engineering Office 62012 Civitanova marche, Italy

Abstract
High-strength low-alloy steels with high service properties, in particular, resistance to atmospheric corrosion, become ever wider applied in mechanical and industrial engineering. Their application allows not only reducing specific weight of metal structures, but also increasing their reliability and operating life. In view of that, on the base of steel 06g2B, steel 06g2BdP with higher corrosion resistance was developed. In order to improve its corrosion resistance, copper and phosphorus content in the steel was increased. The work deals with the issue of the impact of thermal cycles of welding on mechanical properties and structure of HAZ metal in welded joints of atmospheric-resistant steel 06g2BdP. It is shown that as to the values of static strength, ductility and impact toughness steel 06g2BdP is not inferior to steel 06g2B, and is superior to steel 10KhSNd. Its application is rational as an alternative to the above-mentioned steels in fabrication of modem metal structures by gas-shielded manual and mechanized arc welding in the range of HAZ metal cooling rates specified for them. 13 Ref., 2 Tables, 4 Figures. Keywords: corrosion-resistant steel, thermal cycle of welding, heat-affected zone, structure, properties

Received 26.08.2020

References

1. Shymanovskyi, O.V. (2020) Essays on problems of out of class bridges. Kyiv, Stal [in Ukrainian].
2. Kovtunenko, V.A., Sineok, A.G., Gerasimenko, A.M., Zadorozhny, V.A. (2005) Typical damages of welded metal structures of bridges. The Paton Welding J., 10, 27–32.
3. Konyukhov, A.d. (1995) Corrosion and reliability of railway equipment. moscow, Transport [in Russian].
4. Konyukhov, A.d. (2006) Rolled stock with improved properties for more effective bridge structures. Stal, 1, 74–76 [in Russian].
5. Konyukhov, A.d., Ruvinskaya, E.m. (2002) Bridge spans from atmospheric-resistant steel. Zashchita Metallov, 1, 89– 95 [in Russian].
6. Zhang, B., Chen, W., Xu, J. (2018) Mechanical behavior of prefabricated composite box girders with corrugated steel webs under static loads. J. of Bridge Engineering, 1, 23(10). https://doi.org/10.1061/(ASCE)BE.1943-5592.0001290
7. Wu, J., Yang, D., Su, Q. (2019) Inspection and evaluation strategy for uncoated weathering steel bridges. InIOP Conference Series: Materials Sci. and Engin., 677, 2, 22-23. IOP Publishing. https://doi.org/10.1088/1757-899X/677/2/022023
8. Kovtunenko, V.A., gerasimenko, A.m., Petruchenko, A.A. et al. (2007) Steel roll stock of improved atmosphere resistance for welded building structures. In: Dorogy i Mosty, NDI, 7, 297–304 [in Russian].
9. Kovtunenko, V.A., gerasimenko, A.m. Sineok, A.g. (2004) High-strength sparsely-alloyed steel 06G2B ≥ 440 MPa for bridge building. Avtomobilni Dorogy i Dorozhnie Budivnytsvo, 69, 106–113 [in Russian].
10. Kovtunenko, V.A., gerasimenko, A.m., gotsulyak, A.A. (2006) Selection of steel for critical building welded structures. The Paton Welding J., 11, 27–31.
11. Sineok, A.g., gerasimenko, A.m., Ryabokon, V.d. et al. (2014) Atmospheric-resistant rolled stock of c355–500 strength class for bridge metal structures. Mosty i Tonneli: Teoriya, Issledovaniya, Praktika, 5, 83–91 [in Russian].