"Suchasna Elektrometallurgiya" (Electrometallurgy Today), 2025, #1, 15-18 pages
The efficiency of using chips for melting and deoxidizing ShKh15 steel in an induction furnace
V.O. Shapovalov, V.R. Burnashev, O.V. Hnatushenko, V.V. Barabash, D.M. Zhyrov
E.O. Paton Electric Welding Institute of the NAS of Ukraine
11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine.
E-mail: shapovalov@paton.kiev.ua
Abstract
The possibilities of recycling chips in a crucible induction furnace (CIF) are examined. To reduce the remelting time
of ShKh15 steel and aluminum chips, they were pressed into briquettes with a diameter of 100 mm and remelted in the
CIF. The behavior of gaseous impurities during melting and deoxidation was studied. It was shown that under CIF furnace
conditions, it is possible to obtain metal suitable for both direct manufacturing of products and for the production
of consumable electrodes. 10 Ref., 2 Tabl., 3 Fig.
Keywords: crucible induction furnace, ShKh15 steel, pressing, briquettes, aluminum, deoxidation
Received: 31.10.2024
Received in revised form: 08.01.2025
Accepted: 26.02.2025
References
1. Kiparisov, S.S., Padalko, O.V. (1979) Problems of producing of powders and products from them using chip waste as raw material. Poroshk. Metallurgiya, 9, 56-65 [in Russian].
2. Noskov, V.A., Chernyshov, A.V., Karmazyna, V.V. (2008) Investigation of the parameters of the metal shaving packaging process. Metallurgicheskaya i Gornorudnaya Promyshlennost, 4, 125-127 [in Russian].
3. Nikitin, V.V. Creation and research of the technology of briquetting powder waste from aluminum production: Syn. of Thesis for Cand. of Techn. Sci. Degree. Donetsk, 2002.
4. Veretilnyk, O.V., Biktahirov, F.K., Shapovalov, V.O. et al. (2020) Metal shaving processing technologies (Review). Suchasna Elektrometalurhiya, 2, 31-38 [in Ukrainian].
https://doi.org/10.37434/sem2020.02.065. Zherebtsov, S.N. (2012) Application of technology of electroslag remelting of shavings of high-alloyed steels and alloys to obtain a dimensional workpiece. Elektrometallurgiya, 4, 32-34 [in Russian].
https://doi.org/10.1134/S00360295120602376. (2010) Method for producing of ingots of cutting waste. Ukraine, Pat. 54324, Int. Cl. C22B9/00, No u201003645.
7. Abramova, K.B., Samuylov, S.D. (2005) Method of briquetting metal shavings. Rynok Vtorichnykh Metallov, 28(2), 50-54 [in Russian].
8. (2007) Method for metal charge compacting. Ukraine, Pat. 79977, Int. Cl. C22B1/248, No a200501214.
9. Shapovalov, V.A., Burnashev, V.R., Bikragirov, F.K. et al. (2009) Recycling of chipsof heat-resistant steel EP609-Sh using the method of compacting at electric current with subsequent electroslag remelting. Sovrem. Elektrometall., 3, 43-45.
10. Shapovalov, V.A., Burnashev, V.R., Grishchenko,T.I. et al. (2021) Plasma-arc remelting of ShKh15 bearing steel. Suchasna Elektrometalurhiya, 1, 35-38.
https://doi.org/10.37434/sem2021.01.04
Advertising in this issue: