The Paton Welding Journal, 2001, №10

2001 №10 (03)

2001 №10 (05)

---

The Paton Welding Journal, 2001, #10, 12-16 pages

Barrels of units for detonation spraying of coatings

Yu.A. Kharlamov

East-Ukrainian National University, Lugansk, Ukraine

Abstract
The paper deals with the advantages of technological application of detonation modes of gas mixture combustion, chiefly for thermal spraying of coatings, as well as various design features of combustion chambers of the coating units. Feasibility of developing the processes of spraying of coatings, using cylindrical detonation waves, and also using continuous gas detonation, is noted.
Keywords: thermal spraying, detonation in gases, detonation-gas spraying, barrels, detonation guns

References

1. (1990) D-Gun for spraying wear resistant coats. Finishing, 5, 24.
2. (1990) Un nouveau canon a detonation: Le super D-GUN d'Union Carbide. Industrie, 4, 34 - 38.
3. Shorshorov, M.Kh., Kharlamov, Yu.A. (1978) Physicochemical principles of detonation spraying of coatings. Moscow: Nauka.
4. Zverev, A.I., Sharivker, S.Yu., Astakhov, E.A. (1979) Detonation spraying of coatings. Leningrad: Sudostroyeniye.
5. Bartenev, S.S., Fedko, Yu.P., Grigorov, A.I. (1982) Detonation coatings in machine-building. Leningrad: Mashinostroyeniye.
6. Movshovich, I.Ya., Dolmatov, A.I., Podolsky, B.A. (1999) Technology and equipment for detonation spraying of coatings with preset properties. Suchasne Mashinobuduvannya, 1, 111-115.
7. Garanin, V.M., Ivanenko, A.A., Klimenko, S.A. (1999) Detonation spraying of coatings - new possibilities in restoration of parts. Ibid., 2, 96- 99.
8. (1991) High-velocity spray gun produces touch-hard metal coatings. Adv. Mater., 18, 54 - 68.
9. Tyurin, Yu.N. (1999) Improvement of equipment and technologies for detonation spraying of coatings. Avtomaticheskaya Svarka, 5, 13 - 18.
10. Kharlamov, Yu.A. (1986) Schematic designs of detonation guns for treatment of powder materials. Poroshkovaya Metallurgia, 12, 89 - 95.
11. Kharlamov, Yu .A. (1986) Technology requirements to automation of detonation spraying process. Avtomaticheskaya Svarka, 1, 62- 67.
12. Vasiliev, A.A., Mitrofanov, V.V., Topchiyan, M.E. (1987) Detonation waves in gases. Fizika Goreniya i Vzryva, 5, 109 - 131.
13. Samsonov, G.V., Dvukraev, B.N., Sharivker, S.Yu. et a/. Unit for detonation spraying. USSR author's certificate 513728, Int. Cl. B 05 B 7 / 20; C 23 C 7/ 00. Publ. 05.07.76.
14. Kharlarnov, Yu.A., Shorshorov, M.Kh., Pisklov, Yu. I. et al. (1980) Detonation guns for spraying of coatings. Moscow: IMET AN SSSR.
15. Grigoriev, V.V. (1996) Use of the nozzle in acceleration of particles by flows of detonanion products in tubes. Fizika Goreniya i Vzryva, 5, 21 - 29 .
16. Rybanin, S.S. (1969) On the theory of detonation in tubes with a rough inner surface. Ibid., 3, 395 - 403.
17. Strelchuk, N.A., Mishuev, A.V., Nikitin, A.G. et al. (1984) Gas dynamics of combustion of gas-air mixture in a semiclosed volume at the pressure release into a non-gassy communicating volume. Ibid., 1, 65 - 69.
18. Fagoaga, I., Barykin, G., de Juan, J. et al. (1999) Highfrequency pulse detonation (HFPD) spray process. In: Proc. of UTSC, Dusseldorf.
19. Bartlme, F. (1981) Gas dynamics of combustion. Moscow: Energoizdat.
20. Bykovsky, F.A., Mitrofanov, V.V., Vedernikov, E.F. (1997) Continuous detonation combustion of air-fuel mixtures. Fizika Goreniya i Vzryva, 3, 120 - 131.

---

Suggested Citation

Yu.A. Kharlamov (2001) Barrels of units for detonation spraying of coatings. The Paton Welding J., 10, 12-16.

---