The Paton Welding Journal, 2002, №07

2002 №07 (06)

2002 №07 (08)

---

The Paton Welding Journal, 2002, #7, 38-43 pages

Mass transfer processes in pressure joining of dissimilar metals

L.I. Markashova, V.V. Arsenyuk, G.M. Grigorenko, E.N. Berdnikova

E.O. Paton Electric Welding Institute of the NASU 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine.

Abstract
Considered are the principles of basic physical-chemical processes (plastic deformation, mass transfer, phase formation) accompanying formation of joints in dissimilar materials (copper, titanium, aluminium and their alloys, as well as different grades of steels) characterised by a limited mutual solubility under pressure joining conditions for a wide range of external loading rates (1x10^-4-1x10⁵ s^-1).
Keywords: strain rate, plastic deformation, stresses, segregations, diffusion, dislocations, mass transfer mechanisms, mass flows, phase formation

References

1. Kazakov, N.F. (1976) Diffusion bonding of materials. Moscow: Mashinostroenie.
2. Gelman, A.S. (1970) Principles of pressure welding. Moscow: Mashinostroenie.
3. Shron, R.Z., Zelezin, V.N. (1978) Heat treatment and properties of welded joints. Leningrad: Mashinostroenie.
4. Bakshi, O.A. (1977) Theory and practice of welding manufacturing. Sverdlovsk: UPI.
5. Yoshivasu, I., Takahiko, S., Masahiro, S. et al. (1998) Characteristics of behaviour of diffusion in the transition zone of a copper-aluminium joint in friction welding. Transact. of Jap. Soc. Meeh. Eng. A, 618, 494-499.
6. Kazuvuki, H., Takeshi, I.. Takenobu, A. et al. (1993) Parameters of explosion welding and strength of joint in cladding stainless steel with different aluminium alloys using an intermediate stainless steel plate J. JWS. 1, 16-21.
7. Markashova, L.I., Malevskv, Yu.B. (1975) Peculiarities of diffusion in joining without lusion. Avtomatich. Svarka, 10, 9-11,23.
8. Markashova, L.I., Kireev, L.S., Zamkov, V.N. et al. (1997) Peculiarities of formation of an interfacial zone in pressure welding of dissimilar metals. In: Welded structures. Harwood A.P.
9. Markashova, L.I., Statsenko, V.V., Ignatenko, A.I. et al. (1993) Peculiarities of mass transfer under diflerent conditions of pressure welding. In: Proc, of Conf, on Advanced Technologies in Machine-Building and Instrument Making, Saratov, May 1993. Saratov: SPL.
10. Markashova, L.I., Sergeeva, Yu.A., Statsenko, V.V. et al. (1990) Study of micromechanism ol structure lormation under conditions of magnetic-pulse welding. In: Welding of dissimilar, composite and multilayer materials. Kyiv: PWI.
11. Petushkov, V.G., Markashova, L.I., Zotov, M.I. et al. (1989) Micromechanisms and conditions of localisation of deformation in high-energy loading. In: Proc, of 10th Int. Conf, on High-Energy Effects on Metals, Lvublena, Sept. 18-22, 1989.
12. Petushkov, V.G., Markashova, L.I., Zotov, M.I. et al. (1989) Peculiarities of plastic deformation of aluminium in explosion welding. In: Coll. of pap. of Int. Conf, on Special Methods of Welding, Zagreb, March 30, 1989.
13. Shumon, P. (1966) Diffusion in solids. Moscow: Metallurgiya.
14. Messner, A., Benson, R., Dorn, I. (1961) Self-diffusion in nickel single crystals. Transact, of ASM, 53, 227-232.
15. Reynolds, I.E., Averbach, B.L., Cohen, M.L. (1957) Selfdiffusion and inter-diffusion in gold-nickel alloys. Acta Met., 5, 29.
16. Frank, F.C., Turnbull, D. (1966) Self-diffusion along edge dislocations in nickel. Phys. Rev., 2, 495-504.
17. (1973) Processes of inter-diffusion in alloys. Ed. bv K.P. Gurov. Moscow: Nauka.
18. Shinvaev, A.Ya. (1975) Diffusion processes in metals. Moscow: Nauka.
19. Bokshtejn, S.Z., Ginzburg, S.S., Kishkin, S.T. et al. (1984) Diffusion along grain boundaries. Poverkhnost, 2, 231-234.
20. Wassan, A.R., Dorn, I.E. (1965) Analysis of enhanced diffusivity in nickel. J. Appl. Phys., 1, 222-228.
21. Hoffman, R.E., Turnbull, D.I. (1954) The effect of relative crystal and boundary orientations on grain boundary diffusion rates. Acta Met., 2, 419-426.
22. Hoffman, R.E., Pikus, F.W., Ward, R.A. (1956) Self-diffusion in solid nickel. Transact, of AT ME, 206, 483-485.
23. Romashkin, Yu.P. (1968) Study of diffusion in metals at plastic deformation. Syn. of Thesis for Cand. Techn. Sei. Degree. Moscow.
24. Osipov, K.A. (1960) Theoretical problems of high-temperature strength of metals and alloys. Moscow: ANdSSR.
25. Ruoff, A.L., Balluffi, R. (1963) On strain-enhanced diffusion in metals and point defect. J. Appl. Phys., 34, 1634-1647.
26. Balluffi, R.W. (1982) Grain boundary diffusion mechanism in metals. Metallurg. Trans., 12, 2069-2096.
27. Balluffi, R.W., Cahn, J.W. (1981) Mechanism for diffusion induced grain boundary migration. Acta Met., 13, 493-500.
28. Kimura, II., Maddin, R. (1954) Golden single crystal vacancies concentrations, deformed at high temperatures. Ibid., 9, 1065-1069.
29. Coodhew, P.J., Darbw T.P., Balluffi, R.W. (1976) On the dislocation structure. 'Scripta Met., 5, 495-499.
30. Rai, R., Ashby, M.F. (1971) On grain boundary sliding and diffusion at creep. Met. Trans., 4, 1113-1127.
31. Dekhtvar, I.Ya., Mikhalenkov, V.S. (1959) Influence of crystalline structure defects on diffusion parameters in nickel alloys. In: Investigations on high-temperature alloys. Moscow: AN SSSR.
32. Geguzin, Ya.E. (1984) Physics of sintering. Moscow: Nauka.
33. Goldstein, I.J., Ilanneman, R.E., Ogilvie, R.E. (1965) Diffusion in the Fe-Ni system at 1 and 4 kbar pressure. Transact. of Met. Soc. AIME, 4, 812-820.
34. Vladimirov, V.I., Kusov, A.A. (1982) Interaction of mobile avalanche dislocations with ensemble of dipoles. Fizika Metallov i Metalloved., Issue 2, 367-371.
35. Larikov, L.N., Falchenko, V.M., Mazanko, V.F., et al. (1974) Peculiarities of mass transfer in welding ol armcoiron in solid state. Avtomatich. Svarka, 5, 19-21.
36. Arsenvuk, V.V., Gertsriken, D.S., Mazanko, V.V. et al. (1997) Migration of atoms in iron-argon metastable solid solution. Dopovidi NANU, 8, 108-112.
37. Gertsriken, D.S., Mazanko, V.V., Tyshkevich, V.M. et al. (1999) Mass transfer in metals at lbw temperatures under external effects. Kyiv: G.V. Kurdyumov IMF.
38. Egprushin, V.E., Panin, V.E., Savushkin, E.V. et al. (1987) Highly excited states in crystals. Izv. Vuzov, Fizika, 1, 9-33.
39. Olemskoj, A.I„ Panin, V.E., Petrunin, V.A. (1988) On collective mode of highly excited state of solid. Ibid., 12, 14-18.
40. Zasimchuk, E.E., Markashova, L.I. (1990) Microbands in rolling-deformed nickel single crystals. Mat. Sei. and Eng. A, 127, 33-39.
41. Markashova, L.I., Sergeeva, Yu.A., Chudakov, V.A. et al. (1991) Peculiarities ol structure formation and mechanisms of plastic deformation in magnetic-pulse welding. Avtomatich. Svarka, 3, 21-26.

---

Suggested Citation

L.I. Markashova, V.V. Arsenyuk, G.M. Grigorenko, E.N. Berdnikova (2002) Mass transfer processes in pressure joining of dissimilar metals. The Paton Welding J., 07, 38-43 .

---