The Paton Welding Journal, 2003, №08

2003 №08 (07)

2003 №08 (09)

---

The Paton Welding Journal, 2003, #8, 35-40 pages

Hardfacing the working components of tillage and harvesting agricultural machinery (Review)

Ch.V. Pulka

I.Pulyuj Ternopil State Technical University, Ternopil, Ukraine

Abstract
The paper presents a review of the existing methods of hardfacing the tools of agricultural machinery and considers their advantages and drawbacks.
Keywords: hardfacing processes (arc, gas, resistance, plasma, explosion, rolling, laser, induction), flat parts, agricultural machinery

References

1. Bol, A.A., Leskov, S.P. (1985) Induction hardfacing of parts in agricultural engineering. In: Hardfacing. Experience and efficiency of application. Kyiv: PWI.
2. Vishnevsky, A.A., Kostylyov, Yu.M., Ostrov, D.D. (1978) Technology of manufacturing of hardfaced disc cutters. Hardfacing of parts of metallurgical and mining equipment. Abstracts. Moscow: NUInformtyazhmash.
3. Strelbitsky, V.F. (1978) Disk tillage machines. Moscow: Mashinostroenie.
4. Lozovsky, V.P., Ostapenko, A.T., Prokopenko, V.A. (1983) Investigation of working capacity and criteria of marginal state or hoeing plough discs. Trakrory i Selkhozmashiny, 6, 15-16.
5. Tkachyov, V.N. (1971) Wear and improvement of life of agricultural machinery parts. Moscow: Mashinostroenie.
6. Rabinovich, A.Sh. (1962) Self-sharpening plough shares and other soil-cutting machine parts. Moscow: GOSNITI.
7. Sidorov, A.M. (1987) Repair of machine parts by spraying and hardfacing. Moscow: Mashinostroenie.
8. Bol, A.A., Leskov, S.P., Sviridenko, E.P. et al. (1986) Hardfacing of hoeing plough discs. In: Hardfacing in manufacturing of machine parts and equipment. Kyiv: PWI.
9. Lehman, H., Herrmann, J. (1979) Auftragsschweissen von Packerscheiben. ZIS Mitt., 8, 826-840.
10. Blume, F., Kretschmann, G., Rosert, R. (1982) Diinnschichtauftragschweissen Moeglichkeiten und Anwendung. Schweisstechnik, 11, 501-503.
11. Nikolaenko, M.R., Rymorov, E.V. (1976) New technological processes of electric arc and electric resistance hardfacing of high-wear parts of structural and road machines. Moscow: TsNIITEstrojmasn.
12. Gelman, A.S., Tsemakhovich, B.D., Chudnovsky, A.D. et al. (1978) Explosion cladding of steel. Moscow: Mashinostroenie.
13. Ryabtsev, LA. (1982) Wear-resistant clad rolled metal. Kyiv: Znanie.
14. Ryabtsev, I.A., Rozenfeld, Kh.Kh., Chin, A.I. (1984) Technology of manufacturing of clad plough shares of land clearers. In: Design and technology of manufacturing of agriculture machinery. Issue 14.
15. Klimenko, Yu.V. (1982) Electric resistance hardfacing. Applications and prospects of development. In: Current methods of hardfacing and their application. Kyiv: PWI.
16. Klimenko, Yu.V. (1978) Electric resistance hardfacing. Moscow: Metallurgiya.
17. Turkin, V.P., Putilin, V.G.. Nikolaenko, M.R. et al. (1978) Electric resistance hardfacing of cutter discs. Avtomatich. Svarka, 2, 74-76.
18. Mamuliya, G.E., Murov, G.F., Tyulenev, V.P. et al. (1984) Resistance cladding of tillage machine tools. Svarochn. Proizvodstvo, 2, 37-39.
19. Kalensky, V.K., Gladky, V.P., Frumin, LN. (1963) Investigation and development of automatic method for hardfacing of car exhaust valves. Avtomatich. Svarka, 1, 17-18.
20. Kosilov, A.I. (1983) Plasma hardfacing of parts with powder compositions. Tekhnika v Sei. Khoz., 1, 30-32.
21. Danilov, A.I., Komarcheva, E.S. (1982) Plasma surfacing of corrosionahd wear-resistant materials. Elektrotekhnika, 5, 58-60.
22. Podlekarev, N.N., Belozersky, L.N., Olekseenko, I.D. (1980) Optimum technological conditions of plasma hardfacing of agriculture machinery parts. In: Mechanisation and electrification of agriculture industry of Non-Black Earth Zone of the USSR. Issue 23.
23. Salkova, S.S., Komarcheva, E.S., Mishchenko, L.G. (1987) Strengthening of tillage machine tools by plasma hardfacing method. In: Advanced methods of hardfacing by corrosionand wear-resistant materials. Leningrad: Energiya.
24. Podlekarev, N.N., Belozersky, L.N. (1980) Semi-automatic machine for plasma hardfacing of plough share blades. In: Mechanisation and electrification of agricultural, industry of Non-Black Earth Zone of the USSR. Issue 23.
25. Tsukr, V., Vild, I. (1976) Experience in cladding of tool steels and their heat treatment. In: Proc, of 3rd Int. Symp. on Application of Explosion Energy in Welding, Cladding, Compacting and Pressing with Metallic Powder for Manufacturing of Metallic Materials.
26. Ryabtsev, I.A. (1981) Bimetallic rolled metal with clad layer of granulated powder PG-S1. In: Abstr. of pap. of 3rd Republ. Sci.-Techn. Conf, on Current Methods of Hardfacing and Consumables. Knarkiv.
27. Kalner, V.D., Goryushina, M.N., Sichuzhnikova, A.A. (1984) Processes of interaction on boundary of bimetallic billet manufactured by rolling of non-sintered powder. Met alloved. i Term. Obrab. Metallov, 3, 28-29.
28. Fyodorov, B.N., Osadchy, V.A., Tits, M.Yu. et al. (1975) Prospects of application of compacted materials in parts of agricultural machinery tools. Traktory i Selkhozmashiny, 9, 39-41.
29. Kretzchmar, H., Sporl, D., Schwable, H. (1983) Aufplattiren Verschleissfaster Schichten. ZIS Mitt., 2, 108-115.
30. Ryabtsev, I.A. (1981) Application of wear-resistant clad rolled metal in manufacturing of tillage machine tools. In: Theoretical and technological principles of hardfacing. Hardfacing in mechanical engineering and repair. Kyiv: PWI.
31. Ryabtsev, LA. (1998) Classification and characteristics of methods of hardfacing. Svarshchik, 3, 23-25.
32. Fominsky, L.P., Levchuk, M.V., Bajsman, A.F. et al. (1987) Hardfacing of agricultural machinery tools with electron accelerator. Svarochn. Proizvodstvo, 11, 4-6.
33. Kovalenko, V.S., Golovko, L.F., Merkulov, G.V. et al. (1981) Laser beam strengthening of parts. Ed. by V.S. Kovalenko. Kyiv: Tekhnika.
34. Bol, A.A., Leskov, S.P. (1986) State and prospects of strengthening of agricultural machinery tools by induction hardfacing. In: Abstr. of pap. of All-Union Seminar on State and Prospects of Strengthening of Tractor and Agricultural Machinery Tools. Moscow.
35. Ryabtsev, LA. (2000) Induction hardfacing. Svarshchik, 5, 13-16.
36. Tkachyov, V.N., Fishtejn, B.M., Kasintsev, N.V. et al. (1970) Induction hardfacing of hard alloys. Moscow: Mashinostroenie.
37. Tkachyov, V.N., Lakosin, N.L, Vlasov, E.I. et al. Machine for induction hardfacing of hoes. USSR author’s cert. 214696. Publ. 1968.
38. Smirnov, LA., Vinokur, I.Sh., Moshlevsky, E.L. et al. Machine for induction hardfacing. USSR author’s cert. 284213. Publ. 1970.
39. Bol, A.A. (1984) Development of induction hardfacing in agricultural machinery. In: Technology. Issue 3.
40. Shably, O.N., Pulka, Ch.V., Budzan, B.P. (1988) Ways of energy saving in induction hardfacing of thin-wall discs. Avtomatich. Svarka, 12, 56-58.
41. Pulka, Ch.V., Shably, O.N., Budzan, B.P. et al. Method of hardfacing of thin shaped discs. USSR author’s cert. 1619571. Int. Cl. В 23 К 13/00.
42. Pulka, Ch.V., Shably, O.N., Grabin, V.F. et al. (1991) Improvement of technology of induction hardfacing of shaped discs. Avtomatich. Svarka, 1, 57-61.
43. Pulka, Ch.V. (1991) Study and optimisation of technology of induction hardfacing of thin shaped discs. Thesis for Cand. of Techn. Sci. Degree. Kyiv.
44. Shably, O.N., Pulka, Ch.V. (1994) Technology and equipment for induction hardfacing of thin shaped discs. Avtomatich. Svarka, 5/6, 48-50.
45. Shably, O.N., Pulka, Ch.V., Pismenny, A.S. (1997) Optimisation of design values of inductor for induction hardfacing of thin steel discs. Ibid., 6, 17-20.
46. Pulka, Ch.V. (1997) Influence of induction hardfacing conditions on thickness of deposited layer and deformation value of thin steel discs. Ibid., 10, 57-58.
47. Pulka, Ch.V. (1998) Programming of heating condition in induction hardfacing of thin steel discs. Ibid., 1, 48-50.
48. Shably, O.N., Pulka, Ch.V., Mikhajlishin, V.M. et al. (1999) Residual displacements of thin steel discs in induction hardfacing with wear-resistant powder-like hard alloys. Ibid., 9, 57-59.
49. Shably, O.N., Pulka, Ch.V., Pismenny, A.S. (2002) Optimisation of inductor parameters for uniform heating of discs across the width of the hardfacing zone, allowing for scree- hing. The Paton Welding J., 11, 24-26.
50. Pulka, Ch. (2002) Mechanised line for continuous-successive induction hardfacing of thin shaped discs. Visnyk TDTU, 2, 83-90.
51. Pulka, Ch. (2002) Energy-saving automated line for simultaneous induction hardfacing of thin shaped discs. Ibid., 3, 41-48.

---

Suggested Citation

Ch.V. Pulka (2003) Hardfacing the working components of tillage and harvesting agricultural machinery (Review). The Paton Welding J., 08, 35-40.

---