The Paton Welding Journal, 2007, №09

2007 №09 (11)

2007 №09 (02)

---

The Paton Welding Journal, 2007, #9, 2-5 pages

Distribution of interstitial impurities within the joining zone in friction welding

O.D. Smiyan, S.I. Kuchuk-Yatsenko, G.K. Kharchenko, I.V. Zyakhor, E.I. Butkova, A.V. Nikolnikov

E.O. Paton Electric Welding Institute of the NASU. 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine.

Abstract
Distribution of interstitial impurities (oxygen and hydrogen) in joints on steel 10G2FB produced by friction welding was studied using the local mass-spectral analysis procedure and equipment fitted with a laser probe. The nature of distribution of interstitial impurities in the joining zone produced by different friction welding methods (conventional and inertia) was experimentally determined.
Keywords: friction welding, conventional friction welding, inertia friction welding, joining zone, interstitial impurities, local content, plastic and elastic deformation zones

References

1. Smiyan, O.D., Zheni-Majskaya, L.O., Lysak, V.I. et al. (1985) Nitrogen, oxygen and carbon distribution in the joining zone of explosion welded metals. Avtomatich. Svarka, 2, 29–33.
2. Butkova, E.I., Smiyan, O.D., Kaleko, D.M. et al. (1988) Hydrogen and oxygen distribution in weld metal during capacitor discharge percussion stud welding of AMg6 alloy. Ibid., 2, 17–22.
3. Zyakhor, I.V. (2001) Modern equipment for friction welding. The Paton Welding J., 7, 48–52.
4. Lebedev, V.K., Chernenko, I.A., Vill, V.I. et al. (1987) Friction welding: Refer. Book. Leningrad: Mashinostroenie.
5. Kuchuk-Yatsenko, S.I., Zyakhor, I.V. (2002) Mechanism of bimetal joints formation in friction welding. The Paton Welding J., 7, 2–9.
6. Smiyan, O.D. (2004) Redistribution of interstitial and alloying elements in thermal and deformation treatment, and its effect on initiation and propagation of cracks in metal: Syn. of Thesis for Dr. of Techn. Sci. Degree. Kiev: PWI.
7. Smiyan, O.D., Zheni-Majskaya, L.O., Gavrilyuk, L.S. (1986) Influence of explosion treatment of metal on hydrogen content and redistribution. In: Explosion welding and properties of welded joints. Volgograd: VPI.
8. Smiyan, O.D. (2002) Atomic mechanism of interaction between environment material and deformed metal. Fizyka ta Khimiya Tv. Tila, 4, 662–674.
9. Smiyan, O.D., Kruzhkov, A.G. (1972) About some peculiarities of movement of gas diffusion flows in metals. Doklady AN SSSR, 202(6), 1311–1313.
10. Gertsriken, D.S., Mazanko, V.F., Tyshkevich, V.M. et al. (1999) Mass transfer in metals at low temperatures under conditions of external interactions. Kiev: IMF.
11. (1996) Solid state physics: Encyclopedia. Ed. by V.G. Bariakhtar. Vol. 1. Kiev: Naukova Dumka.
12. Smiyan, O.D. (2004) Mechanism of formation of equilibrium grain nuclei during recrystallization of structural steels. Metalofizyka ta Novitni Tekhnologii, 4, 571–578.

---

Suggested Citation

O.D. Smiyan, S.I. Kuchuk-Yatsenko, G.K. Kharchenko, I.V. Zyakhor, E.I. Butkova, A.V. Nikolnikov (2007) Distribution of interstitial impurities within the joining zone in friction welding. The Paton Welding J., 09, 2-5.

---