The Paton Welding Journal, 2011, №10



2011 №10 (04)

2011 №10 (06)

---

The Paton Welding Journal, 2011, #10, 18-21 pages  

EFFECT OF DUCTILE SUB-LAYER ON HEAT RESISTANCE OF MULTILAYER DEPOSITED METAL

I.A. RYABTSEV, A.A. BABINETS and I.I. RYABTSEV

E.O. Paton Electric Welding Institute, NASU, Kiev, Ukraine
 
 
Abstract
Effect of deposition of a ductile sub-layer on heat resistance of deposited metal 25Kh5FMS was studied. It was established that deposition of the ductile sub-layer with wire Sv-08A provides an approximately 20 % increase in heat resistance of the 40Kh steel specimens deposited with flux-cored wire PP-Np-25Kh5FMS.
 
 
Keywords: arc cladding, deposited metal, multilayer cladding, ductile sub-layer, heat resistance
 
 
Received:                ??.??.??
Published:               28.10.11
 
 
References
1. Frumin, I.I. (1961) Automatic electric arc surfacing. Kharkov: Metallurgizdat.
2. Tylkin, M.A. (1971) Increase in service life of metallurgical equipment parts. Moscow: Metallurgiya.
3. Dulnev, R.A., Kotov, P.I. (1980) Thermal fatigue of metals. Moscow: Mashinostroenie.
4. Balandin, Yu.F. (1967) Thermal fatigue of metals in ship and power machine building. Leningrad: Sudostroenie.
5. Davidenkov, N.N., Likhachev, V.A. (1962) Irreversible forming of metal in cyclic heat action. Moscow: Mashgiz.
6. Tylkin, M.A., Yalovoj, N.I., Polukhin, P.T. (1970) Temperature and stresses in parts of metallurgical equipment. Moscow: Vysshaya Shkola.
7. Birger, I.A., Shorr, B.F., Demianushko, I.V. et al. (1975) Thermal strength of machine parts. Moscow: Mashinostroenie.
8. Artinger, I. (1982) Tool steels and their heat treatment. Moscow: Metallurgiya.
9. Dovnar, S.A. (1975) Thermomechanics of strengthening and fracture of forging dies. Moscow: Mashinostroenie.
10. Troshchenko, V.T., Shemegan, Yu.M., Sinyavsky, L.P. (1974) Study of fracture mechanisms of alloys in thermal fatigue and in combined effect by cyclic mechanical and thermal stresses. In: Proc. of All-Union Symp. on Low-Cycle Fatigue at Higher Temperatures (Chelyabinsk), Issue 2, 137-156.
11. Ryabtsev, I.A. (2010) Reconditioning and strengthening of parts used under wear conditions and different types of cyclic loading by the cladding methods: Syn. of Thesis for Dr. of Techn. Sci. Degree. Kiev.
12. Ryabtsev, I.I., Chernyak, Ya.P., Osin, V.V. (2004) Modular machine for testing of deposited metal. Svarshchik, 1, 18-20.

---

Suggested Citation

I.A. RYABTSEV, A.A. BABINETS and I.I. RYABTSEV (2011) EFFECT OF DUCTILE SUB-LAYER ON HEAT RESISTANCE OF MULTILAYER DEPOSITED METAL. The Paton Welding J., 10, 18-21.

---