Print

2014 №06 (14) DOI of Article
10.15407/tpwj2014.06.15
2014 №06 (16)

The Paton Welding Journal 2014 #06
The Paton Welding Journal, 2014, #6-7, 76-79 pages  

INVESTIGATION OF INFLUENCE OF MICROALLOYING WITH TITANIUM AND BORON OF WELD METAL ON ITS MECHANICAL PROPERTIES IN UNDERWATER WELDING

S.Yu. MAKSIMOV, V.V. MACHULYAK, A.V. SHEREMETA and E.I. GONCHARENKO


E.O. Paton Electric Welding Institute, NASU. 11 Bozhenko Str., 03680, Kiev, Ukraine. E-mail: office@paton.kiev.ua
 
 
Abstract
One of the negative consequences of effect of extreme conditions of underwater welding is a low level of properties of welded joints, in the first turn, of ductility. Traditionally, this task is solved by optimization of microstructure of weld metal due to rational alloying. The purpose of this work was to establish the influence of microalloying of weld metal with titanium and boron on its mechanical properties in underwater welding using flux-cored wire. The structure of metal formed as a result of microalloying was investigated, and values of mechanical properties of deposited metal were determined. Optimal proportions of microalloying were established, at which high values of elongation of weld metal are provided. It is shown that its mechanical properties meet the requirements of A class of Specification on underwater welding ANSI/AWS D3.6. 5 Ref., 2 Tables, 7 Figures.
 
 
Keywords: underwater welding, flux-cored wire, weld metal, microalloying, structure, mechanical properties
 
 
Received:                28.03.14
Published:               28.09.14
 
References
1. Ibarra, S., Grabbs, C., Olson, D.L. (1988) Fundamental approaches to underwater welding metallurgy. J. of Metals, 12, 8-10.
2. Oh, D.W., Olson, D.L. (1990) The influence of boron and titanium on low carbon steel weld metal. Welding J., 4, 151-158.
3. Sanchez-Osio, A., Liu, S., Olson, D.L. et al. (1993) Underwater wet welding consumables for offshore applications. In: Proc. of 12th Int. Conf. on Offshore Mechanics and Arctic Engineering, Vol. 3, PtA, 119-128.
4. Maksimov, S.Yu., Krazhanovsky, D.V. (2006) Content of acicular ferrite in weld metal in wet welding. The Paton Welding J., 1, 45-47.
5. ANSI/AWS. D3.6: Specification for underwater welding.

Suggested Citation

S.Yu. MAKSIMOV, V.V. MACHULYAK, A.V. SHEREMETA and E.I. GONCHARENKO (2014) INVESTIGATION OF INFLUENCE OF MICROALLOYING WITH TITANIUM AND BORON OF WELD METAL ON ITS MECHANICAL PROPERTIES IN UNDERWATER WELDING. The Paton Welding J., 06, 76-79.