The Paton Welding Journal, 2015, №12



2015 №12 (07)

DOI of Article 10.15407/tpwj2015.12.08

2015 №12 (09)

---

The Paton Welding Journal, 2015, #12, 39-44 pages
 

Comparative hygienic evaluation of arc welding process at constant and pulsed electrode wire feed

O.G. Levchenko, S.Yu. Maksimov, A.O. Lukianenko And I.V. Lendel

E.O. Paton Electric Welding Institute, NASU. 11 Bozhenko Str., 03680, Kiev, Ukraine. E-mail: office@paton.kiev.ua
 
 
Abstract
The problem of improving the sanitary-hygienic characteristics in welding zone is solved by designing and equipping the welder workplace with a local exhaust, completing of welding heads and holders for mechanized welding with nozzles of special design which provide suction of welding fume or application of a protective mask with a system of forced purified air supply. All this additionally complicates and increases the cost of welding equipment. Therefore, the investigations are carried out aimed at study of influence of power parameters (voltage and current) of welding process on the volume of welding fumes evolution and their harmful components. The hygienic characteristics of arc welding process in shielding gases at a constant electrode wire feed using circuits of electrical parameters control of welding power sources of serial production as well as pulsed control of electric parameters of arc for electrode metal transfer are well studied and presented in the technical literature. The possibilities of influence of welding process with a pulsed electrode wire feed on hygienic characteristics were studied not enough. Therefore, in this paper the results of comparative hygienic evaluation of arc welding at pulsed and constant feed of electrode wire of different grades are presented. The advantages and possibilities of reducing evolution of harmful substances in the air of working area are shown applying welding with pulsed wire feed and selecting the appropriate parameters of its feeding mode. 14 Ref., 3 Figures.
 
Keywords: arc welding, mechanized equipment, electrode wire, pulsed feed, hygienic characteristics, reduction of fumes evolution
 
 
Received:                06.07.15
Published:               21.01.16
 
 
References

1. Golovatyuk, A.P., Sidoruk, V.S., Levchenko, O.G. et al. (1985) Intensity of aerosol formation in manual modulated-current welding. Avtomatich. Svarka, 2, 39-40.
2. Levchenko, O.G. (2000) Formation of aerosols in CO2 modulated-current welding. The Paton Welding J., 8, 47-49.
3. Castner, H.R. (1995) Gas metal arc welding using pulsed fume generation current. Welding Res. Suppl., February, 59-68.
4. Lebedev, V.A. (2014) Specifics of control of consumable electrode welding process with pulsed electrode wire feed. Svarka i Diagnostika, 1, 16-18.
5. Palmer, W.G., Eaton, J.C. (2007) Effects of welding on health: AWS Int. Standard Book 978-0-87171-067-3.
6. Antonini, J.M. (2003) Health effects of welding. Critical Rev. in Toxicology, 33(1), 61-103. https://doi.org/10.1080/713611032
7. ANSI Z49.1-2005: Safety in welding, cutting and allied processes, Sect. E5.4, 12. AWS.
8. Lebedev, V.A., Lendel, I.V. (2013) Control of pulsed movement of electrode wire in mechanized welding due to change of feed pitch. Zagotovitel. Proizv. v Mashinostroenii, 3, 10-14.
9. Potapievsky, A.G., Saraev, Yu.N., Chinakhov, D.A. (2012) Consumable-electrode shielded-gas welding of steels. Technique and technology of future. Tomsk: TPU.
10. DSTU ISO 15011-1:2008: Occupational health and safety in welding and allied processes. Laboratory method of aerosol and gas extraction formed in arc welding. Pt1: Determination of emission level and sampling for analysis of aerosol microparticles. Valid from 2008-8-15. Kyiv: Derzhstandart Ukrainy.
11. (1990) 4945-88: Guidelines for determination of harmful substances in welding aerosol (solid phase and gases). Moscow: Minzdrav SSSR.
12. Levchenko, O.G. (1986) Influence of shielded gas composition and welding parameters on bulk emissions of welding aerosol. Avtomatich. Svarka, 1, 73-74.
13. Voropaj, N.M., Benidze, Z.D., Buchinsky, V.N. (1989) Peculiarities of CO2 welding process with pulsed electrode wire feed. Ibid., 2, 23-26, 36.
14. Levchenko, O.G. (1992) Influence of technological parameters of CO2 welding of structural steels on aerosol emission. Ibid., 9/10, 31-33.

---

Suggested Citation

O.G. Levchenko, S.Yu. Maksimov, A.O. Lukianenko And I.V. Lendel (2015) Comparative hygienic evaluation of arc welding process at constant and pulsed electrode wire feed. The Paton Welding J., 12, 39-44.

---