The Paton Welding Journal, 2018, №02



2018 №02 (02)

DOI of Article 10.15407/tpwj2018.02.03

2018 №02 (04)

---

The Paton Welding Journal, 2018, #2, 14-18 pages
 

Influence of corrosion damage on cyclic life of butt welded joints strengthened by high-frequency mechanical peening

V.V. Knysh, S.A. SoloveJ, L.I. Nyrkova and V.N. Miryanin

E.O. Paton Electric Welding Institute of the NAS of Ukraine 11 Kazimir Malevich Str., 03150, Kyiv, Ukraine. E-mail: office@paton.kiev.ua
 
Abstract
In the article, the results of investigation of efficiency of applying the technology of high-frequency mechanical peening for increasing the fatigue resistance characteristics of butt welded joints of steel 15KhSND with a subsequent long-term effect of the environment climatic factors, characteristic for a moderate cold marine climate are given. The effect of given climate was modeled by holding the joints in the salt fog chamber KST-1 at the temperature of (35 ± 2) °C and during spraying the sodium chloride solution for 15 minutes every 45 minutes. The duration of corrosion tests of specimens in the chamber KST-1 was 1200 h. After holding in the chamber KST-1, the metallographic examinations of the surface layer of the weld metal and the metal of heat-affected zone of welded joints in the initial (non-strengthened) state and in the state strengthened by this technology were carried out. The depth and degree of damage by corrosion spots and cavities of surface layers of weld metal and heat-affected zones of welded joints were calculated. The fatigue resistance characteristics of welded joints in the initial (non-strengthened) state and in the state strengthened by high-frequency mechanical peening were experimentally established after effect of a neutral salt fog for 1200 h. 11 Ref., 1 Table, 6 Figures.
Keywords: butt welded joint, neutral salt fog, fatigue, high-frequency mechanical peening, increase in resistance to corrosion fatigue
 
Received:                24.11.17
Published:               15.03.18
 
 
References

1. Madox, S.J., Dore, M.J., Smith, S.D. (2011) A case study of the use of ultrasonic peening for upgrading a welded steel structure. Welding in the World, 55(9), 56–67. https://doi.org/10.1007/BF03321321
2. Abdullah, A., Malaki, M., Eskandari, A. (2012) Strength enhancement of the welded structures by ultrasonic peening. Materials & Design, 38, 7–18. https://doi.org/10.1016/j.matdes.2012.01.040
3. Lefebvre, F., Peyrac, C., Elbel, G. et al. (2017) HFMI: Understanding the mechanisms for fatigue life improvement and repair of welded structures. Welding in the World, 61(4), 789–799. https://doi.org/10.1007/s40194-017-0455-8
4. He, B., Deng, H., Jiang, M. et al. (2017) Effect of ultrasonic impact treatment on the ultra-high cycle fatigue properties of SMA490BW steel welded joints. The Int. J. of Advanced Manufacturing Technology. DOI 10.1007/s00170-017-0608-3. https://doi.org/10.1007/s00170-017-0608-3
5. Malaki, M., Ding, H. (2015) A review of ultrasonic peening treatment. Materials and Design, 87, 1072–1086. https://doi.org/10.1016/j.matdes.2015.08.102
6. Mikkola, E., Remes, H., Marquis, G. (2017) A finite element study on residual stress stability and fatigue damage in high-frequency mechanical impact (HFMI)-treated welded joint. J. of Fatigue, 94, 16–29. https://doi.org/10.1016/j.ijfatigue.2016.09.009
7. Schubnell, J., Hardenacke, V., Farajian, M. (2017) Strain-based critical plane approach to predict the fatigue life of high-frequency mechanical impact (HFMI)-treated welded joints depending on the materials condition. Welding in the World, 61(6), 1190–1210. https://doi.org/10.1007/s40194-017-0505-2
8. Foehrenbach, J., Hardenacke, V., Farajian, M. (2016) High-frequency mechanical impact treatment (HFMI) for the fatigue improvement: Numerical and experimental investigations to describe the condition in the surface layer. Ibid., 60(4), 749–755. https://doi.org/10.1007/s40194-016-0338-4
9. Fan, Y., Zhao, X., Liu, Y. (2016) Research on fatigue behavior of the flash welded joint enhanced by ultrasonic peening treatment. Materials & Design, 94, 515–522. https://doi.org/10.1016/j.matdes.2016.01.070
10. Knysh, V.V., Solovej, S.A., Nyrkova, L.I. et al. (2016) Influence of corrosion damage on cyclic fatigue life of tee welded joints treated by high-frequency mechanical peening. The Paton Welding J., 9, 42–46. https://doi.org/10.15407/tpwj2016.09.09
11. Knysh, V.V., Solovej, S.A., Kirian, V.I. et al. (2017) Application of high-frequency peening to improve the performance of butt welded joints in the atmosphere of temperate climate. Ibid., 4, 14–18. https://doi.org/10.15407/tpwj2017.04.03

---

Suggested Citation

V.V. Knysh, S.A. SoloveJ, L.I. Nyrkova and V.N. Miryanin (2018) Influence of corrosion damage on cyclic life of butt welded joints strengthened by high-frequency mechanical peening. The Paton Welding J., 02, 14-18.

---