The Paton Welding Journal, 2010, №11

2010 №11 (02)

2010 №11 (04)

---

The Paton Welding Journal, 2010, #11, 12-16 pages
 

Strength of brazed joints on heat-resistant nickel alloy Inconel 718 produced by using palladium brazing filler metals

V.F. Khorunov¹, S.V. Maksymova¹, Yu.V. Butenko², A.B. Maly²

¹E.O. Paton Electric Welding Institute, NASU, Kiev, Ukraine
²State Enterprise «Zarya-Mashproekt», Nikolaev, Ukraine
 
 
Abstract
Comparative investigations were carried out to study strength of high-temperature vacuum brazed joints on heat-resistant nickel alloy Inconel 718, made by using filler metals of the Pd-Ni-Cr-Si, Pd-Ni-Co-Cr-Si and Pd-Ni-Cr-B systems and experimental filler metal of the Pd-Ni-Cr-Ge system. The experimental filler metal was shown to have a high potential for ensuring specified short- and long-time strength of the brazed joints.
 
 
Keywords: brazing, heat-resistant precipitation-hardening nickel alloy Inconel 718, brazing filler metal, nickel, palladium, short- and long-time strength
 
 
Received:                ??.??.??
Published:               28.11.10
 
 
References
1. Seams, Ch., Hagel, V. (1976) Heat-resistant alloys. Moscow: Metallurgiya.
2. (2003) Reference book on brazing. Ed. by I.E. Petrunin. Moscow: Mashinostroenie.
3. (1999) Constitutional diagrams of binary metal system: Refer. Book. Vol. 3. Ed. by N.P. Lyakishev. Moscow: Mashinostroenie.

---

Suggested Citation

V.F. Khorunov, S.V. Maksymova, Yu.V. Butenko, A.B. Maly (2010) strength of brazed joints on heat-resistant nickel alloy Inconel 718 produced by using palladium brazing filler metals. The Paton Welding J., 11, 12-16.

---