The Paton Welding Journal, 2010, №12

2010 №12 (03)

2010 №12 (05)

---

The Paton Welding Journal, 2010, #12, 15-17 pages
 

Wear resistance and strength of tungsten carbides WC-W₂C produced by different methods

A.I. Bely

E.O. Paton Electric Welding Institute, NASU, Kiev, Ukraine
 
 
Abstract
Investigation results are given on wear resistance and strength of particles of fused tungsten carbides WC-W₂C produced by different methods: mechanical crushing of ingots, thermal centrifugal spraying and spheroidisation of powders by using the induction plasma technology.
 
 
Keywords: hard-facing, hard-facing consumables, tungsten carbides, thermal centrifugal spraying, strength, wear resistance, hard-facing composite alloys
 
 
Received:                ??.??.??
Published:               28.12.10
 
 
References
1. Parenchuk, V.V., Bely, A.I., Zhudra, A.P. et al. (2001) State-of-the-art and prospects of development of production of tungsten carbide for hard-facing of drill bits. Tsvet. Metally, 1, 92-93.
2. Meerson, G.A., Zelikman, A.N. (1973) Metallurgy of rare metals. Moscow: Metallurgiya.
3. Dignard, N.M., Boulos, M.I. (1997) Ceramic and metallic powder spheroidization using induction plasma technology. In: Proc. of United Thermal Spray Conf. (15-19 Sept., 1997, Indianapolis). Indianapolis: CRTP, 29-31.
4. Pawlowski, L. (1995) The science and engineering of thermal spray coatings. Chichester: John Wiley & Sons.
5. Gladky, P.V. (1972) Study and development of the technology for plasma-powder surfacing: Syn. of Thesis for Cand. of Techn. Sci. Degree. Kiev.
6. Fedorchenko, I.M., Andrievsky, R.A. (1963) Principles of powder metallurgy. Kiev: AN USSR.
7. Zhudra, A.P. (1980) Study and development of materials for surfacing of composite alloys resistant to intensive abrasive wear: Syn. of Thesis for Cand. of Techn. Sci. Degree. Kiev.
8. Yuzvenko, Yu.A., Frumin, E.I., Pashchenko, M.A. et al. (1975) Spherical tungsten carbide. Method of production and properties. Poroshk. Metallurgiya, 7, 1-5.
9. Yuzvenko, Yu.A. (1978) Study and development of consumables and technology for mechanised open arc surfacing: Syn. of Thesis for Dr. of Techn. Sci. Degree. Kiev.
10. Yuzvenko, Yu.A., Zhudra, A.P., Frumin, E.I. (1973) Abrasive wear of composite alloys. Avtomatich. Svarka, 7, 62-63.

---

Suggested Citation

A.I. Bely (2010) Wear resistance, strength of tungsten carbides WC-W₂C produced by different methods. The Paton Welding J., 12, 15-17.

---