Print

2021 №09 (05) DOI of Article
10.37434/tpwj2021.09.06
2021 №09 (07)

The Paton Welding Journal 2021 #09
The Paton Welding Journal, 2021, #9, 39-43 pages

Use of capacitive energy storages to create high-efficient multistation welding systems

O.Ye. Korotynskyi and M.I. Skopyuk


E.O. Paton Electric Welding Institute of the NASU. 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine. E-mail: office@paton.kiev.ua

Abstract
Analysis of structures of multistation sources for arc welding, designed on the base of capacitive energy storages, was carried out. Their prospects for creation of high-efficient welding-technological systems are shown. The structures of centralized power supply systems of welding stations are considered, in which one powerful electric energy storage is used. A decentralized power supply system of the stations is more flexible, when an individual electric energy storage is installed at each workplace. Its advantage consists in the fact that a standard rectifier of VDGM type can be applied. For shipbuilding, a combined power supply system can be used, which implements the positive qualities of both power supply systems and provides a high quality and power efficiency of the welding process. As an example of the use of multistation power sources, a diagram is given, which is based on the method of charge transfer. 13 Ref., 6 Figures.
Keywords: pulsed arc welding, capacitive energy storage, capacitor with double electric layer, charge transfer method, multistation welding systems, step-down converter

Received 13.07.2021

References

1. Bunkin, P.Ya., Donskoj, A.V. (1985) Multistation welding systems. Leningrad, Sudostroenie [in Russian].
2. (1986) Arc welding equipment: Refer. Book. Ed. by V.V. Smirnov. Leningrad, Energoatomizdat [in Russian].
3. Korotynsky, A.E., Makhlin, N.M., Poloskov, S.I. (2009) High-efficient multistation welding systems with extended technological possibilities. Svarka i Diagnostika, 1, 5–8 [in Russian].
4. Korotynsky, A.E., Makhlin, N.M., Bogdanovsky, V.A. (2002) About design of electronic controllers of welding current for multistation welding systems. The Paton Welding J., 12, 16–24.
5. Androsenko, V.I., Sergevnin, B.I. (1989) In: USSR author’s cert. 1473923. Publ. 23.04.89 [in Russian].
6. Androsenko, V.I., Sergevnin, B.I. (1989) In: USSR author’s cert. 1276453. Publ. 15.12.86 [in Russian].
7. Magerl, K., Binder, Yu., Shtiglbaur, V., Artelsmair, B. (2013) Method and device for energy conversion and welding apparatus. Pat. 2495734 RU. Publ. 20.10.2013 [in Russian].
8. Magerl, K., Binder, Yu., Shtiglbaur, V., Artelsmair, B. (2014) Method and device for energy conversion and welding apparatus. Pat. 2507043 RU. Publ. 20.02.2014 [in Russian].
9. Paton, B.E., Korotynskyi, O.E., Skopyuk, M.I. (2017) Control mode of multistation arc welding system with accumulator. Pat. 116573 UA. Publ. 25.05.2017 [in Ukrainian].
10. Paton, B.E., Korotynskyi, O.E., Skopyuk, M.I. (2019) Control mode of multistation arc welding system with accumulator. Pat. 119296 UA. Publ. 25.05.2019 [in Ukrainian].
11. Korotynskyi, O.E., Skopyuk, M.I., Drachenko, M.P., Vertetska, I.V. (2015) Supply device for nonconsumable welding electrode. Pat. 99852 UA. Publ. 25.06.2015 [in Ukrainian].
12. Korotynskyi, O.E., Skopyuk, M.I., Drachenko, M.P., Shapka, V.O. (2015) Device for conversion of alternating voltage of commercial frequency into alternating voltage of arbitrary frequency. Pat. 103509 UA. Publ. 25.12.2015 [in Ukrainian].
13. Korotynskyi, O.E., Skopyuk, M.I. (2015) Device for capacitor-discharge spot welding. Pat. 9657 UA. Publ. 10.02.2015 [in Ukrainian].

Suggested Citation

O.Ye. Korotynskyi and M.I. Skopyuk (2021) Use of capacitive energy storages to create high-efficient multistation welding systems. The Paton Welding J., 09, 39-43.