Print

2021 №10 (07) DOI of Article
10.37434/tpwj2021.10.08
2021 №10 (01)

The Paton Welding Journal 2021 #10
The Paton Welding Journal, 2021, #10, 52-56 pages

Production of titanium ingots with regulated oxygen content by electron beam melting

S.V. Akhonin1, O.M. Pikulin1, V.O. Berezos1, A.Yu. Severin1 and O.G. Erokhin2


1E.O. Paton Electric Welding Institute of the NASU. 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine. E-mail: office@paton.kiev.ua
2SC «SPC «Titan» of the E.O. Paton Electric Welding Institute of the NASU» 26 Raketna Str., 03028, Kyiv, Ukraine

Abstract
Comprehensive research work was performed to produce ingots of Grade 2 titanium alloy of 600 mm diameter with regulated oxygen content of 0.12–0.16 % and an ingot of Grade 3 titanium alloy of 1100 mm diameter and up to 3 m length by the method of electron beam cold-hearth melting in the production facilities of SC «SPC «Titan» of the E.O. Paton Electric Welding Institute of the NAS of Ukraine» in multifunctional electron beam unit UE5810. A method of forming the charge billet and a formula for calculation of the amount of TiO2 powder for alloying are proposed. Defectfree ingots of titanium alloys of Grade 2 and Grade 3 with regulated oxygen content were produced and the range of deviation of its distribution in the ingot metal of ± 0.02 % was provided. It is shown that the proposed modes of electron beam heating of the consumable billet, metal melting in the cold hearth and in the mould, as well as the melting rate ensure complete dissolution of titanium dioxide particles in the cold hearth, and absence of defects in the produced ingots, enriched in oxygen.
Keywords: electron beam cold hearth melting; electron beam unit; titanium ingot; oxygen; regulated oxygen content; titanium dioxide; melting rate; macrostructure

Received: 22.06.2021
Accepted: 11.11.2021

References

1. Olejnik, T.A., Guryanova, T.P., Kolobov, G.A. et al. (2010) Development of technologies for the extraction, enrichment and processing of titanium raw materials in the world and in Ukraine. Metalurgiya: Zb. Nauk. Prats of ZGIA, 22, 44–59 [in Russian].
2. Chervony, I.F., Telin, V.V., Pozhuev, V.I. et al. (2007) Titanium and fields of its application. In: Proc. of Int. Sci.-Tech. Conf. on Ti-2007 in CIS (15–18 Apr. 2007, Yalta). Kiev, 2007, 314–325 [in Russian].
3. (2013) Titanium Metal: Market Outlook to 2018. Sixth Ed. Roskill Information Services Ltd, USA.
4. Osipenko, A.V. (2015) Development of technology of producing raw materials for titanium alloys from substandard titanium sponge. Eastern-European J. of Enterprise Technologies, 4(5), 28-32 [in Russian]. http://nbuv.gov.ua/UJRN/Vejpte_ 2015_4%285%29__7 https://doi.org/10.15587/1729-4061.2015.47789
5. Cheng-Lin, Li, Yang, Yu, Wen-Jun, Ye et al. (2015) Effect of boron addition on microstructure and property of low cost beta titanium alloy. In: TMS 2015, 144th Annual Meeting & Exhibition, 1167-1172. https://link.springer.com/chapter/ 10.1007/978-3-319-48127-2_141 https://doi.org/10.1007/978-3-319-48127-2_141
6. Davydov, S.I., Shvartsman, L.Ya., Ovchinnikov, A.V., Teslevich, S.M. (2006) Some peculiarities of titanium alloying with oxygen. In: Proc. of Int. Sci.-Tech. Conf. on Ti-2006 in CIS (21–24 May, 2006, Suzdal, Russia). Kiev, Naukova Dumka, 253–257 [in Russian].
7. Ryabtsev, A.D., Troyansky, A.A. (2011) Refining and alloying of titanium in the process of electroslag remelting in a chamber furnace. Advances in Electrometallurgy, 9(1), 56–57.
8. Kollerov, M.Yu., Spektor, V.S., Skvortsova, S.V. (2015) Problems and prospectives of application of titanium alloys in medicine. Titan, 48(2), 42–53 [in Russian].
9. Ratiev, S.N., Ryabtseva, O.A., Troyansky, A.A. et al. (2010) alloying titanium with oxygen from the gas phase in chamber electroslag remelting of titanium sponge. Advances in Electrometallurgy, 8(2), 87–92.
10. Egorova, Yu.B., Davydenko, L.V., Mamonov, I.M. (2015) Influence of oxygen alloying on mechanical properties of rods from titanium and Ti–6Al–4V alloy. Int. Research J., 41(10), Pt 2, 49–51 [in Russian]. DOI: https://doi.org/10.18454/ IRJ.2015.41.154
11. Kostenko, V.I., Kruglenko, M.P., Kalinyuk, A.N., Pap, P.A. (2012) Production by of defect-free titanium ingots with controlled oxygen content by electron beam remelting. Advances in Electrometallurgy, 10(1), 29–32.
12. Kablov, E.N. (2012) Strategic trends of development of materials and technologies of their processing for the period up to 2030. Aviats. Materialy i Tekhnologii, S, 7–17 [in Russian].
13. Iliin, A.A., Kolachev, B.A., Polkin, I.S. (2009) Titanium alloys. Composition, structure, properties. Moscow, VILS-MATI [in Russian].
14. Akhonin, S.V., Kruglenko, M.P., Kostenko, V.I. (2011) Mathematical modeling of the process of dissolution of oxygen-containing refractory inclusions in a titanium melt. Advances in Electrometallurgy, 9(1), 13–18.

Suggested Citation

S.V. Akhonin, O.M. Pikulin, V.O. Berezos, A.Yu. Severin and O.G. Erokhin (2021) Production of titanium ingots with regulated oxygen content by electron beam melting. The Paton Welding J., 10, 52-56.