Print

2022 №09 (04) DOI of Article
10.37434/tpwj2022.09.05
2022 №09 (06)

The Paton Welding Journal 2022 #09
The Paton Welding Journal, 2022, #9, 27-32 pages

Chemical overlap welding of epoxy vitremers and their nanocomposites

A.V. Vashchuk, S.I. Motrunich, V.L. Demchenko, M.V. Yurzhenko, M.O. Kovalchuk, E.P. Mamunya


E.O. Paton Electric Welding Institute of the NASU. 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine. E-mail: 4chewip@gmail.com

Abstract
In this work, the technology of chemical overlap welding of polymer materials based on epoxy resins (transparent film) and their nanocomposites with oxidized graphene (black film) was developed. The welding of film materials with a thickness of 0.5 mm was carried out under the conditions of isothermal heating of 150 °C and pressure of the limiting plate. The selection of an effective welding mode was carried out at different durations of welding: 30 and 60 min. Mechanical tests of the produced welded joints showed their strength at the level of the base material. Features of the structural organization of welded joints of composites were investigated by the method of wide-angle X-ray diffraction. The chemical structure of the material of welded joints was investigated by the Fourier transmission infrared spectroscopy. Modeling of stresses that occur in the specimens of welded joints was calculated using the values of the modulus of elasticity and the coefficient of linear expansion, experimentally found by the method of thermal mechanical analysis. 12 Ref., 1 Tabl., 7 Fig.
Keywords: epoxy nanocomposites, oxidized graphene, vitremers, welded joints, chemical welding

Received: 11.05.2022
Accepted: 11.11.2022

References

1. Zheng, Y. Dong, Y.H. Li (2018) Resilience and life-cycle performance of smart bridges with shape memory alloy (SMA)-cable-based bearings, Construct. Build. Mater., 158, 389-400. https://doi.org/10.1016/j.conbuildmat.2017.10.031
2. Li, F., Liu, Y.J., Leng, J.S. (2019) Progress of shape memory polymers and their composites in aerospace applications. Smart Mater. Struct,. 28, 103003. https://doi.org/10.1088/1361-665X/ab3d5f
3. Yuan, J.K., Neri, W., Zakri, C. et al. (2019) Shape memory nanocomposite fibers for untethered high-energy microengines. Science, 365, 155-158. https://doi.org/10.1126/science.aaw3722
4. Shin, Y.C., Lee, J.B., Kim, D.H. et al. (2019) Development of a shape-memory tube to prevent vascular stenosis. Advanced Materials, 31, 1904476. https://doi.org/10.1002/adma.201904476
5. Li, Z., Qi, X.M., Xu, L. et al. (2020) A self-repairing, large linear working range shape memory carbon nanotubes/ethylene vinyl acetate fiber strain sensor for human movement monitoring. ACS Appl. Mater. Interfaces, 12 (37), 42179-42192. https://doi.org/10.1021/acsami.0c12425
6. Xu, W., Wong, M.C., Guo, Q.Y. et al. (2019) Healable and shape-memory dual functional polymers for reliable and multipurpose mechanical energy harvesting devices. J. Mater. Chem. 7, 16267-16276. https://doi.org/10.1039/C9TA03382C
7. Volkov, S.S. (2001) Welding and adhesive bonding of polymer materials. Moscow, Khimiya [in Russian]
8. Ji, F., Liu, X., Sheng, D., Yang, Y. (2020) Epoxy-vitrimer composites based on exchangeable aromatic disulfide bonds: Reprocessibility, adhesive, multi-shape memory effect. Polymer, 197, 122514. https://doi.org/10.1016/j.polymer.2020.122514
9. Na, J.H., Evans, A.A., Bae, J. et al. (2015) Programming reversibly self-folding origami with micropatterned photo-crosslinkable polymer trilayers. Advanced Materials, 27, 79-85. https://doi.org/10.1002/adma.201403510
10. Silverberg, J.L., Evans, A.A., McLeod, L. et al. (2014) Using origami design principles to fold reprogrammable mechanical metamaterials. Science, 345, 647-650. https://doi.org/10.1126/science.1252876
11. Li, Z., Yang, Y., Wang, Z. et al. (2017) Polydopamine nanoparticles doped in liquid crystal elastomers for producing dynamic 3D structures. Journal of Materials Chemistry A, 5, 6740-6746. https://doi.org/10.1039/C7TA00458C
12. Vashchuk, A.V., Motrunich, S.I., Demchenko, V.L., Iurzhenko, M.V. (2022) Chemical welding of nanocomposites based on epoxy and oxidized graphene. The Paton Welding J., 4, 50-53. https://doi.org/10.37434/as2022.04.07

Suggested Citation

A.V. Vashchuk, S.I. Motrunich, V.L. Demchenko, M.V. Yurzhenko, M.O. Kovalchuk, E.P. Mamunya (2022) Chemical overlap welding of epoxy vitremers and their nanocomposites. The Paton Welding J., 09, 27-32.