The Paton Welding Journal, 2025, №03

2025 №03 (03)

DOI of Article 10.37434/tpwj2025.03.04

2025 №03 (05)

---

The Paton Welding Journal, 2025, #3, 30-34 pages

Study of the temperatures of phase transformation in heat-resistant titanium alloy of Ti‒Al‒Zr‒Si‒Mo‒Nb‒Sn alloying system

A.Yu. Severyn¹, V.Yu. Bilous¹, L.M. Radchenko¹, V.A. Kostin¹, I.I. Alekseenko¹, L.T. Yeremeyeva¹, M.M. Kuzmenko²

¹E.O. Paton Electric Welding Institute of the NASU. 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine. E-mail: tim.severin72@gmail.com
²Frantsevych Institute for Materials Science Problems of the NASU 3 Omelian Pritsak Str., 03142, Kyiv, Ukraine

Abstract
Calculated continuous-cooling-transformation diagram (CCT-diagram) was derived for titanium alloy of Ti‒Al‒Zr‒Si‒Mo‒ Nb‒Sn system to determine the phase transformation kinetics. The structures and microhardness of samples of heat-resistant titanium alloy of Ti‒Al‒Zr‒Si‒Mo‒Nb‒Sn alloying system, quenched from different temperatures, were studied. It was proved that application of computational methods of modeling the structure-phase transformations for heat-resistant titanium alloys allows obtaining results close to the experimental values.
Keywords: heat-resistant titanium alloy, thermodynamic modeling, phase transformation, deformation processing, temperature, structure, phase, microhardness

Received: 20.01.2025
Received in revised form: 21.02.2025
Accepted: 09.04.2025

References

1. Hsueh-Chuan Hsu, Shih-Ching Wu, Shih-Kuang Hsu et al. (2014) Structure and mechanical properties of as-cast Ti-Si alloys. Intermetallics, 47(4), 11-16. https://doi.org/10.1016/j.intermet.2013.12.004
2. Shevchenko, O.M., Kulak, L.D., Kuzmenko, M.M. et al. (2023) The influence of the deformation and heat treatment on the structure and heat-resistance of Ti-Al-Zr-Si alloys. Mater. Sci., 59(1), 40-48. https://doi.org/10.1007/s11003-023-00741-y
3. Solonina, O.R., Glazunov, S.P. (1976) Heat-resistant titanium alloys. Moscow, Metallurgiya [in Russian]. 4. Akhonin, S.V., Berezos, V.O., Pikulin, O.M. et al. (2022) Producing high-temperature titanium alloys of Ti-Al-Zr-Si-Mo-Nb-Sn system by electron beam melting. Suchasna Elektrometalurhiya, 2, 3-9 [in Ukrainian]. https://doi.org/10.37434/sem2022.02.01
5. Fan, Z., Tsakiropoulos, P., Miodownik, A.P. (1994) A generalized law of mixtures. J. of Mater. Sci., 29, 141-150. https://doi.org/10.1007/BF00356585
6. Lukas, H.L., Fries, S.G., Sundman, B. (2007) Computational thermodynamics: The CALPHAD method. U.K., Cambridge University Press. https://doi.org/10.1017/CBO9780511804137
7. Khina, B., Goranskiy, G.G. (2017) Thermodynamics of multicomponent amorphous alloys: Theories and experiment comparison. Adv. Materials and Technologies, 1, 036-043. https://doi.org/10.17277/amt.2017.01.pp.036-043
8. Dinsdale, A.T. (1991) SGTE data for pure elements. Calphad, 15(4), 317-425. https://doi.org/10.1016/0364-5916(91)90030-N
9. Akhonin, S.V., Belous, V.Yu., Selin, R.V., Kostin, V.A. (2021) Influence of TIG welding thermal cycle on temperature distribution and phase transformation in low-cost titanium alloy. In: Proc. of IOP Conf. Series: Earth and Environmental Sci., 688, 1-9. https://doi.org/10.1088/1755-1315/688/1/012012
10. Lyakisheva, N.P. (2000) State diagram of binary metallic systems: Refer. Book. Vol. 2, Book 2. Moscow, Mashinostroenie [in Russian].
11. Akhonin, S.V., Severyn, A.Yu., Berezos, V.O. et al. (2024) Influence of deformation processing modes on the structure and mechanical properties of a high-temperature titanium alloy of the Ti-Al-Zr-Si-Mo-Nb-Sn system. Metallophysics and Advanced Technologies, 46(7), 705-715. https://doi.org/10.15407/mfint.46.07.0705

---

Suggested Citation

A.Yu. Severyn, V.Yu. Bilous, L.M. Radchenko, V.A. Kostin, I.I. Alekseenko, L.T. Yeremeyeva, M.M. Kuzmenko (2025) Study of the temperatures of phase transformation in heat-resistant titanium alloy of Ti‒Al‒Zr‒Si‒Mo‒Nb‒Sn alloying system. The Paton Welding J., 03, 30-34. https://doi.org/10.37434/tpwj2025.03.04

---