The Paton Welding Journal, 2004, №11

2004 №11 (04)

2004 №11 (06)

---

The Paton Welding Journal, 2004, #11, 20-27 pages

State-of-the-art and advanced technologies of electron beam welding of structures

B.E. Paton, A.A. Bondarev

E.O. Paton Electric Welding Institute of the NASU 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine.

Abstract
The paper describes a number of ingenious technological developments made by specialists of the E.O. Paton Electric Welding Institute during the period from 1969 to 2003. Advantages of electron beam welding process are shown by an example of specific structural materials. Recommendations on design of a welding process under industrial enterprise conditions are given. Examples of new technological developments, including welding ofhigh-strength aluminium alloys alloyed with lithium and scandium, welding of dissimilar and composite materials, are described.
Keywords: electron beam welding, aluminium alloys, programming, heat input, welded structures, dissimilar materials, composite materials, dispersion, fabrication technology, discrete scanning

References

1. Paton, B.E., Nazarenko, O.K., Bondarev, A.A. et al. (1983) Electron beam welding and post-weld thermomechanical treatment of large diameter shells of 1201 alloy. Avtomatich. Svarka, 9, 1–5.
2. Bondarev, A.A. (1999) Electron beam welding of highstrength aluminium alloys. The Paton Welding J., PilotIs¬sue, 50–53.
3. Bondarev, A.A., Lozovskaya, A.V., Ishchenko, A.Ya. et al. (1974) Peculiarities of electron beam welding of 1201 alloy. Avtomatich. Svarka, 5, 44–47.
4. Bondarev, A.A., Tretyak, N.G. (1980) Properties of sheet and plate EB welded joints of 1201 aluminium alloy. Ibid., 7, 49–51.
5. Bondarev, A.A., Tretyak, N.G. (1981) Peculiarities of EB welded 1201 aluminium alloy forgings of up to 250 mm thickness and mechanical properties ofjoints. Ibid., 4, 1–5.
6. Bondarev, A.A. (1981) Fatigue strength of AMg6, AMg6N, 1201 aluminium alloys and their joints made by electron beam welding. Ibid., 6, 40–42.
7. Bondarev, A.A., Lobanov, L.M., Pivtorak, V.A. et al. (1975) Investigation of mechanical properties, structure and strains of 01420 alloy joints made by electron beam weld¬ing. Ibid., 3, 14–17.
8. Bondarev, A.A., Rabkin, D.M., Kuzmenko, O.S. (1976) Weldability of AMg6 alloy by the electron beam in different spatial positions. Ibid., 12, 34–37.
9. Bondarev, A.A., Skryabinsky, V.V. (1987) Influence of pa¬rameters of electron beam scanning on characteristics of aluminium alloy welded joints. Ibid., 12, 57–62.
10. Bondarev, A.A., Baranov, V.V. (1988) Automation of interpretation of X-ray patterns of welds. Ibid., 6, 73–74.
11. Bondarev, A.A., Lozovskaya, A.V., Bondarev, Andr.A. (2002) Influence of the processes of fusion welding of highstrength aluminium alloys on mechanical properties and structure of welded joints. In: Proc, of 7th Int. Conf, on Problems of Metallurgy, Metals Science and Welding. Tbilisi: IMET.
12. Ternovoj,, E.G., Bondarev, A.A., Peshcherina, S.V. et al. Electron beam welding of thick plates of AMg6 al- vtomatich. Svarka, 6, 49–52.
13. Bondarev, A.A., Kulaeva, A.F., Mikhajlichenko, M.D. (1965) Advanced methods of processing instrument compo¬nents. Avtomatika i Priborostroenie, 2, 63–66.
14. Bondarev, A.A., Voropaj, N.M., Ivanov, N.P. (1972) Development of electron beam welding technology for item casings of AMg6 alloy. Svarochn. Proizvodstvo,‘З, 18–20.
15. Bondarev, A.A., Shevelev, A.D., Zadery, B.A. (1991) Development of electron beam welding technology of non-ferrous and refractory metals and alloys. Avtomatich. Svarka, 6, 46–48.
16. Bondarev, A.A., Nekrasov, A.A., Morejnis, M.I. et al. (1984) Electron beam welding of shells in local vacuum. Ibid., 2, 75.
17. Zubrienko, G.L., Tenenbaum, F.Z., Petrovanov, V.M. et al. (1980) Electron beam welding of large-sized assemblies of aluminium alloys in local vacuum chambers. In: Proc. of 1st All-Union Conf, on Current Problems of Welding of Non–Ferrous Metals. Kiev: Naukova Dumka.
18. Bondarev, A.A., Tretyak, N.G., Zarechensky, A.V. (1986) Electron beam welding of ADO aluminium as applied to manufacturing of boilers of rail tank cars. In: Abstr. of 3rd All-Union Conf. on Welding of Non-Ferrous Metals. Toliatti: TPI.
19. Bondarev, A.A., Ternovoj, E.G., Shalaj, A.N. (1988) Improvement of structural welded-cast diesel pistons made by EBW method. Avtomatich. Svarka, 8, 74–75.
20. Paton, B.E., Lobanov, L.M., Pavlovsky, V.I. et al. (1989) Manufacturing of large-sized thin-walled welded panels of high-strength aluminium alloys. Ibid., 10, 37–45.
21. Paton, B.E., Nazarenko, O.K., Nesterenkov, V.M. et al. (2004) Computer control of electron beam welding with multi-coordinate displacements of the gun and workpiece. The Paton Welding J, 5, 2–5.
22. Bondarev, A.A., Bondarev, Andr.A., Lankin, Yu.N. (2003) Electron beam welding with a controllable heat and mass transfer. In: Proc. of Int. Conf. on Current Problems in Welding and Life of Structures. Kiev, Nov. 24–27, 2003.
23. Lankin, Yu.N., Bondarev, A.A., Bajshtruk, E.N. (1985) Control of power density distribution of the electron beam across its section. Avtomatich. Svarka, 6, 12–15.
24. Bondarev, A.A., Skryabinsky, V.V. (1987) Influence of pa¬rameters of electron beam scanning on characteristics of aluminium alloy welded joints. Ibid., 12, 57–62.
25. Bondarev, A.A., Skryabinsky, V.V. (1987) Welding of alu¬minium alloys with programmed power density distribution according the heated spot. In: Automatic control of electron beam welding technological process. Kiev: PWI.
26. Bondarev, A.A., Bondarev, Andr.A., Lankin, Yu.N. (2003) Electron beam welding with controllable heat-mass transfer. In: Abstr. of Int. Conf. on Current Problems in Welding and Life of Structures, Kiev, Nov. 24–27, 2003.
27. Lankin, Yu.N., Bondarev, A.A., Bondarev, Andr.A (2001) Computer control of processes in the weld pool during electron beam welding. In: Proc, of Int. Conf, on Surface Engineering and Part Reconditioning, Feodosiya. Kiev: ATM Ukraina.
28. Zhadkevich, M.L., Bondarev, A.A., Zelenin, V.I. et al. (2001) Production of protective-restoration coatings of heatresistant high-nickel alloys. Ibid.
29. Dudko, D.A., Bondarev, A.A., Zelenin, V.I. et al. Method of coating formation on surface of parts. Pat. 46073 Ukraine. Publ. 15.05.02.
30. Bondarev, A.A., Bondarev, Andr.A. (2003) Electron beam welding of tubular transition pieces of stainless steel-alu- minium alloy dissimilar materials. In: Abstr. of Int. Conf. on Current Problems in Welding and Life of Structures , Kiev, Nov. 24–27, 2003.
31. Bondarev, A.A., Bondarev, Andr.A. (1996) Some principles of centrifugal vacuum spraying and mathematical model of the process in electron beam surface melting of a quickly rotating billet. In: Proc. of Int. Conf, on Problems of Welding, Metallurgy and Related Technologies. Tbilisi: IMET.
32. Yushchenko, K.A., Bondarev, A.A., Starushchenko, T.M. et al. (2000) Technology of manufacturing of braze-welded highly-loaded wheels of centrifugal compressors. In: Abstr. of Int. Conf. on Welded Structures . Kiev: PWI.
33. Radzievsky, V.N., Gartsunov, Yu.F., Tkachenko, G.G. et al. (2001) Peculiarities of formation of a thin-walled T-joint using brazing and fusion welding. Svarochn. Proizvodstvo, 4, 42–46.

---

Suggested Citation

B.E. Paton, A.A. Bondarev (2004) State-of-the-art and advanced technologies of electron beam welding of structures. The Paton Welding J., 11, 20-27.

---