The Paton Welding Journal, 2006, №08

2006 №08 (05)

2006 №08 (07)

---

The Paton Welding Journal, 2006, #8, 19-20 pages

Flux-cored wire for electric-arc metallizing of the surface of working rolls of the cold rolling mill tempering stand

V.A. Royanov¹, V.N. Matvienko¹, K.K. Stepnov¹, V.P. Semyonov¹, N.G. Zavarika¹, I.V. Zakharova¹, V.V. Klimanchuk²

¹Priazovsky State Technical University, Mariupol, Ukraine
²Open Joint-Stock Society «Ilyich MMK», Mariupol, Ukraine

Abstract
Flux-cored wire for the process of electric-arc metallizing of the surface of working rolls of a tempering stand of the cold rolling mill and coating technology have been developed. Shown is the possibility of applying finely dispersed wear-resistant materials with provision of a high adhesion resistance of the coating to delamination in the technological process of temper rolling with reduction of 0.5–2.0 %
Keywords: electric-arc metallizing, flux-cored wire, finely dispersed materials, coating, working rolls, tempering stand

References

1. Kolpakov, S.S., Kapnin, V.V., Mukhin, Yu.A. et al. (1995) Chrome-plating of tempering mill working rolls. Stal, 8, 48–50.
2. Mukhin, Yu.A., Soloviov, V.N., Bobkov, E.B. et al. (2002) Examination of strip quality in temper rolling using the chrome-plated rolls. Ibid., 6, 50–52.
3. Royanov, V.A. (1990) Fusion of electrodes in arc metallizing. Svarochn. Proizvodstvo, 2, 35–38.
4. Royanov, V.A., Semyonov, V.P. (1995) Sparsely alloyed flux-cored wire for arc spraying of wear-resistant coatings. Vestnik PGTU, Issue 1, 157–160.

---

Suggested Citation

V.A. Royanov, V.N. Matvienko, K.K. Stepnov, V.P. Semyonov, N.G. Zavarika, I.V. Zakharova, V.V. Klimanchuk (2006) Flux-cored wire for electric-arc metallizing of the surface of working rolls of the cold rolling mill tempering stand. The Paton Welding J., 08, 19-20.

---