The Paton Welding Journal, 2010, №03

2010 №03 (09)

2010 №03 (01)

---

The Paton Welding Journal, 2010, #3, 50-52 pages
 

Resistance spot welding with special edge preparation

Yu.A. Tsumarev

Belarusian-Russian University, Mogilyov, Republic of Belarus
 
 
Abstract
It is shown that beveled edge preparation of the parts to be welded ensures an inclined position of the mating planes, promoting lowering of power in spot weld formation, reduction of harmful influence of bending on the load-carrying capacity of the welded joint in resistance spot welding, and lowering of the degree of non-uniformity of shear and tear force distribution across the cast nugget section.
 
 
Keywords: resistance spot welding, edge preparation, inclined contact plane, force distribution, fracture force
 
 
Received:                ??.??.??
Published:               28.03.10
 
 
References
1. Orlov, B.D., Dmitriev, Yu.V., Chakalev, A.A. et al. (1975) Technology and equipment for resistance welding. Moscow: Mashinostroenie.
2. Shavyrin, V.N., Ryazantsev, V.I. (1981) Glued-welded structures. Moscow: Mashinostroenie.
3. Ryazantsev, V.I., Fedoseev, V.A., Abin, N.N. (1984) Technical-economical efficiency of application of welded, glued-welded and riveted joints. Svarochn. Proizvodstvo, 1, 28-29.
4. Latypova, E.Yu., Tsumarev, Yu.A., Kuzmenko, I.M. et al. Electrode for resistance spot welding. Pat. 6379. BY. Publ. 30.09.2004.
5. Popkovsky, V.A., Latypova, E.Yu., Tsumarev, Yu.A. et al. Electrode for resistance spot welding. Pat. 6500. BY. Publ. 30.09.2004.
6. (1979) Welding in machine-building: Refer. Book. Ed. by V.A. Vinokurov. Vol. 3. Moscow: Mashinostroenie.

---

Suggested Citation

Yu.A. Tsumarev (2010) Resistance spot welding with special edge preparation. The Paton Welding J., 03, 50-52.

---