Print

2012 №09 (02) 2012 №09 (04)

The Paton Welding Journal 2012 #09
The Paton Welding Journal, 2012, #9, 20-25 pages  

EFFECT OF PALLADIUM ON STRUCTURE AND TECHNOLOGICAL PROPERTIES OF Ag-Cu-Zn-Ni-Mn SYSTEM BRAZING FILLER ALLOYS

V.F. Khorunov, S.V. Maksymova and B.V. Stefaniv


E.O. Paton Electric Welding Institute, NASU, Kiev, Ukraine
 
 
Abstract
The effect of palladium on structure, melting ranges and technological properties of alloys of the Ag-Cu-Zn-Ni-Mn system was investigated. It was established that alloying with palladium allows improving strength properties of the brazed joints at an insignificant decrease of the contact angle.
 
 
Keywords: brazing, diamond-hard alloy tool, cadmium-free filler alloys, structure, melting range, contact angle, induction heating, phase transformation temperature, palladium, silver filler alloy, strength of joints
 
 
Received:                22.05.12
Published:               28.09.12
 
 
References
 
1. Roberts, P.M. (1978) Recent developments in cadmium-free silver brazing alloys. Welding J., 10, 23-30.
2. Timmins, P.F. (1994) The development of Ag-based brazing alloys. Ibid., 10, 31-33.
3. Khorunov, V.F., Maksymova, S.V., Stefaniv, B.V. (2010) Effect of tin additions on structure and technological properties of brazing filler metals of the Ag-Cu-Zn system. The Paton Welding J., 7, 16-21.
4. Bochvar, A.A. (1956) Metals science. Moscow: Metallurgizdat.
5. Taran, Yu.N., Mazur, V.I. (1978) Structure of eutectic alloys. Moscow: Metallurgiya.
6. Petrunin, I.E., Lotsmanov, S.N., Nikolaev, G.F. (1973) Brazing of metals. Moscow: Metallurgiya.
7. Klochko, N.A. (1981) Fundamentals of the technology for brazing and heat treatment of hardalloy tool. Moscow: Metallurgiya.
8. Khorunov, V.F., Maksymova, S.V., Stefaniv, B.V. (2010) Manufacture of drill bits for production of dispersed methane in mine working. The Paton Welding J., 6, 41-43.

Suggested Citation

V.F. Khorunov, S.V. Maksymova and B.V. Stefaniv (2012) EFFECT OF PALLADIUM ON STRUCTURE AND TECHNOLOGICAL PROPERTIES OF Ag-Cu-Zn-Ni-Mn SYSTEM BRAZING FILLER ALLOYS. The Paton Welding J., 09, 20-25.