The Paton Welding Journal, 2015, №09



2015 №09 (04)

DOI of Article 10.15407/tpwj2015.09.05

2015 №09 (06)

---

The Paton Welding Journal, 2015, #9, 32-35 pages
 

Computer information-and-measuring system for investigation of arc surfacing processes

I.A. Ryabtsev, Yu.N. Lankin, V.G. Soloviov, P.P. Osechkov, V.A. Tishchenko And A.G. Tikhomirov

E.O. Paton Electric Welding Institute, NASU. 11 Bozhenko Str., 03680, Kiev, Ukraine. E-mail: office@paton.kiev.ua
 
 
Abstract
On the basis of portable computer and advanced software the information-and-measuring system was developed, which is intended to investigate the peculiarities and next automation of the arc surfacing processes. In the surfacing installation equipped with the developed computer information-and-measuring system (CIMS) it is possible to carry out experimental investigation of the influence of surfacing method, diameter or cross section of the used electrode material on its welding and technological characteristics and quality of the deposited beads and layers formation with a high degree of accuracy and reliability. CIMS with accumulation of databases on technologies of arc surfacing of different parts can serve as a basis for creation of systems of automatic control of arc surfacing processes. 3 Ref., 1 Table, 4 Figures.
 
Keywords: arc surfacing, arc surfacing automation, flux-cored wires, surfacing modes, surfacing technologies
 
 
Received:                23.06.15
Published:               26.10.15
 
 
References

1. Bocharnikov, I.V., Gladky, P.V., Demchenko, V.F. et al. (1992) Expert system «Surfacing». In: Deposited metal. Composition, structure, properties, 94-97. Kiev: PWI.
2. Demchenko, V.F., Kozlitina, S.S., Ryabtsev, I.A. (1998) Computer system of design of arc surfacing technology. Avtomatich. Svarka, 11, 61-66.
3. Lankin, Yu.N., Ryabtsev, I.A., Soloviov, V.G. et al. (2014) Effect of electric parameters of arc surfacing using flux-cored wire on process stability and base metal penetration. The Paton Welding J., 9, 25-29. https://doi.org/10.15407/tpwj2014.09.03

---

Suggested Citation

I.A. Ryabtsev, Yu.N. Lankin, V.G. Soloviov, P.P. Osechkov, V.A. Tishchenko And A.G. Tikhomirov (2015) Computer information-and-measuring system for investigation of arc surfacing processes. The Paton Welding J., 09, 32-35.

---