Print

2019 №12 (07) DOI of Article
10.15407/tpwj2019.12.01
2019 №12 (02)

The Paton Welding Journal 2019 #12
The Paton Welding Journal, 2019, #12, 3-10 pages
 
Journal The Paton Welding Journal
Publisher International Association «Welding»
ISSN 0957-798X (print)
Issue #12, 2019 (December)
Pages 3-10

Influence of thermal cycle of surfacing on mechanical properties and resistance of haz metal of rail steel M76 to brittle fracture

V.D. Poznyakov, O.A. Gaivoronskyi, V.A. Kostin, O.M. Berdnikova and S.V. Shmygelskyi


E.O. Paton Electric Welding Institute of the NAS of Ukraine 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine. E-mail: office@paton.kiev.ua

Increasing the life of railway wheels is an urgent problem. The solution to this problem is associated with the optimization of the structural state of metal of railway wheels. In the work the influence of cooling rate during melting on mechanical properties, resistance to brittle fracture and structural changes of the HAZ metal of wheel steel with carbonitride strengthening with a carbon content of 0.63 % were investigated. It is shown that in the process of surfacing, a hardening bainite-martensitic structure is formed, the volume fraction of structural components in which is determined by the cooling rate. The hardened HAZ metal of wheel steel with carbonitride strengthening has a high strength and a low ductility with a high susceptibility to brittle fracture. 12 Ref., 2 Tables, 11 Figures.
Keywords: arc surfacing, carbonitride strengthening, heat-affected-zone, thermal cycle, brittle fracture

 
Received: 10.10.19
Published: 30.01.19
 
 

References

1. Uzlov, I.G. (2003) Advanced processes of manufacturing and quality of railway wheels. Stal, 5, 69-72 [in Russian].
2. Railway wheels and tyres KLW (Interpipe NTZ Ukraine). www.interpipe.biz [in Russian].
3. Uzlov, I.G., Babachenko, A.I., Dementieva, Zh.A. (2005) Influence of steel microalloying on fracture toughness of railway wheels. Metallurgiya i Gornorudnaya Promyshlennost, 5, 46-47 [in Russian].
4. Babachenko, A.I., Litvinenko, P.L., Knysh, A.V. et al. (2011) Improvement of chemical composition of steel for railway wheels ensuring the increase of their resistance to defect formation on roll surface. In: Fundament. i Prikl. Problemy Chyorn. Metallurgii, Transact. of IFM, NANU, 23, 226-233 [in Russian].
5. Ivanov, B.S., Filipov, G.A., Demin, K.Yu. et al. (2007) Modification of wheel steel by nitrogen. Stal, 9, 22-25 [in Russian]. https://doi.org/10.3103/S0967091207090112
6. Sarzhevsky, V.A., Sazonov, V.Ya. (1981) Installation for simulation of welding thermal cycles on the base of MSR-75 machine. Avtomatich. Svarka, 5, 69-70 [in Russian].
7. Gajvoronsky, A.A., Poznyakov, V.D., Markashova, L.I. et al. (2016) Brittle fracture resistance of HAZ metal in arc-welded joints of high-strength steels with carbon content of 0.55-0.65 %. The Paton Welding J., 9, 2-8. https://doi.org/10.15407/tpwj2016.09.01
8. (1972) New methods for evaluation of brittle fracture resistance of metals. Ed. by Yu.N. Robotnov. Moscow, Mir [in Russian].
9. (1985) GOST 25.506-85: Methods of mechanical testing of metals. Determination of fracture toughness characteristics under the static loading. Moscow, Izd-vo standartov [in Russian].
10. Gajvoronsky, A.A. (2014) Resistance to cold crack formation of HAZ metal of welded joint of high-strength carbon steels. The Paton Welding J., 2, 2-11. https://doi.org/10.15407/tpwj2014.02.01
11. Cherepin, V.T. (1968) Experimental technique in physical metal science. Kiev, Tekhnika [in Russian].
12. Vasiliev, V.G., Sarzhevsky, V.A., Kornienko, T.A., Gajvoronsky, A.A. (1997) Attachment to dilatometer for examination of phase transformations at low temperatures. Avtomatich. Svarka, 5, 55-57 [in Russian].

Suggested Citation

V.D. Poznyakov, O.A. Gaivoronskyi, V.A. Kostin, O.M. Berdnikova and S.V. Shmygelskyi (2019) Influence of thermal cycle of surfacing on mechanical properties and resistance of haz metal of rail steel M76 to brittle fracture. The Paton Welding J., 12, 3-10.