Print

2021 №05 (01) DOI of Article
10.37434/tpwj2021.05.02
2021 №05 (03)

The Paton Welding Journal 2021 #05
The Paton Welding Journal, 2021, #5, 12-17 pages

Improving the efficiency of robotic fabrication of steel truss welded structures

V.M. Korzhyk1, A.A. Grynyuk1, V.Yu. Khaskin1, Ye.V. Illiashenko1, I.M. Klochkov1, O.V. Ganushchak1, Yu Xuefen2 and Liuyi Huang2


1E.O. Paton Electric Welding Institute of the NASU. 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine. E-mail: office@paton.kiev.ua
2Zhejiang Academy of Special Equipment Science 310016, Jianggan District, Hangzhou, Zhejiang, 211, Kaixuan Road, China

Abstract
It is shown that to increase the productivity of robotic fabrication of fragments of steel truss RHS (Rectangular Hollow Section) structures it is advisable to make workpieces by precision laser cutting with subsequent assembly of fragments by spot tack welds and consumable-arc seam welding with current-carrying (hot) filler wire. Laser cutting with radiation power of ~1.0 kW and compressed air blowing at the pressure of 1.5 MPa allows obtaining ready for further welding elements of RHS structures with the accuracy of 0‒0.1 mm. It is established that in the case of application of consumable-arc welding with hot filler wire, the speed increases by ~1.5 times compared to conventional consumable- arc welding. 13 Ref., 6 Figures.
Keywords: laser cutting, welding, consumable electrode arc, current-carrying filler wire, fillet joints, carbon steel, structures

Received 26.04.2021

References

1. Radu, D., Radu, B. (2014) Truss beams welded joints strengthening solutions. 41th anniversary faculty of civil engineering subotica. International Conference «Contemporary achievements in civil engineering», 24 April 2015, Subotica, Serbia, pp. 261-269. https://doi.org/10.14415/konferencijaGFS 2015.033.
2. Paton, B.E., Lobanov, L.M., Tereshchenko, V.I. et al. (1994) Robotic production of welded trusses for industrial building overlaps. Avtomatich. Svarka, 12, 26-29 [in Russian].
3. Casper, H.-J. (2014) The First Fully Welded Integral Tube- Truss Bridge of Germany. Petzek E., Bancila R. (Eds) The Eight International Conference «Bridges in Danube Basin». Springer Vieweg, Wiesbaden, pp. 163-172. https://doi.org/10.1007/978-3-658-03714-7_11
4. Radu, D., Galatanu, Tf. (2016) Optimization solutions for truss beams elements welded joints. 4th International Conference «Contemporary achievements in civil engineering», 22 April 2016, Subotica, Serbia, pp. 105-111. https://doi.org/10.14415/konferencijaGFS2016.009
5. Zhao, X.L., Tong, L.W. (2011) New Development in Steel Tubular Joints. Advances in Structural Engineering, 14, 4, 699-715. https://doi.org/10.1260/1369-4332.14.4.699
6. Cheav Por Chea, Yu Bai, Xuebei Pan et al. (2020) An integrated review of automation and robotic technologies for structural prefabrication and construction. Transportation Safety and Environment, 2, 2, 81-96. https://doi.org/10.1093/tse/tdaa007
7. Yang, W., Lin, J., Gao, N., Yan, R. (2018) Experimental Study on the Static Behavior of Reinforced Warren Circular Hollow Section (CHS) Tubular Trusses. Appl. Sci, 8(11), 2237, 1-22. https://doi.org/10.3390/app8112237
8. Grinyuk, A.A., Korzhik, V.N., Shevchenko, V.E. et al. (2015) Main tendencies in development of plasma-arc welding of aluminium alloys. The Paton Welding J., 11, 31-41. https://doi.org/10.15407/tpwj2015.11.04
9. Korzhyk, V., Khaskin ,V., Perepychay, A. et al. (2020) Forecasting the results of hybrid laser-plasma cutting of carbon steel. Eastern-European Journal of Enterprise Technologies, 2/1(104), 6-15. https://doi.org/10.15587/1729-4061.2020.198433
10. Kumar, H., Ganesh, P., Kaul, R. et al. (2006) Laser welding of 3 mm thick laser-cut AISI 304 stainless steel sheet. J. of Materi Eng and Perform, 15, 23-31. https://doi.org/10.1361/105994906X83385
11. Chuangwen, Xu, Jianming, Dou, Yuzhen, Chai et al. (2018) The relationships between cutting parameters, tool wear, cutting force and vibration depth can improve productivity and control cutting force and vibration. Advances in Mechanical Engineering, 10(1), 1-14. https://doi.org/10.1177/1687814017750434
12. Praveen, P., Yarlagadda, P.K.D.V., Kang, M.J. (2005) Advancements in pulse gas metal arc welding. Journal of Materials Processing Technology, 164-165, 1113-1119. https://doi.org/10.1016/j.jmatprotec.2005.02.100
13. Spaniol, E., Trautmann, M., Ungethüm, T. et al. (2020) Development of a highly productive GMAW hot wire process using a two-dimensional arc deflection. Weld World, 64, 873- 883. https://doi.org/10.1007/s40194-020-00880-9

Suggested Citation

V.M. Korzhyk, A.A. Grynyuk, V.Yu. Khaskin, Ye.V. Illiashenko, I.M. Klochkov, O.V. Ganushchak, Yu Xuefen and Liuyi Huang (2021) Improving the efficiency of robotic fabrication of steel truss welded structures. The Paton Welding J., 05, 12-17.