The Paton Welding Journal, 2006, №05

2006 №05 (05)

2006 №05 (07)

---

The Paton Welding Journal, 2006, #5, 26-29 pages

Gas-abrasive wear resistance of thermal spray coatings of Al-Cu-Fe system alloys containing quasi-crystalline phase

Yu.S. Borisov, A.L. Borisova, V.F. Golnik, Z.G. Ipatova

E.O. Paton Electric Welding Institute of the NASU. 11 Kazymyr Malevych Str., 03150, Kyiv, Ukraine.

Abstract
Wear resistance of detonation and plasma coatings of powders based on Al-Cu-Fe alloy with scandium and chromium additions was studied under conditions of gas-abrasive wear at different angle of attack by an abrasive. Dependence of wear of the coatings upon the abrasive attack angle, deposition method, coating composition, and quasi-crystalline content was established.
Keywords: thermal spray coatings, Al-Cu-Fe system alloy, quasi-crystalline phase, gas-abrasive wear

References

1. Borisov, Yu.S., Borisova, A.L., Adeeva, L.I. et al. (2005) Thermal-spray coatings containing the quasi-crystalline phase, peculiarities and applications (Review). Fizika i Khi- miya Tv. Tila, 1, 124–136.
2. De Palo, S., Usmani, S., Sampath, S. et al. (1997) Friction and wear behavior of thermally sprayed Al-Cu-Fe quasicrystal coatings. In: Thermal Spray A: Proc. of United Forum for Sci. and Technol. Advances. Ohio: ASM Int. Materials Park.
3. De Palo, S., Usmani, S., Kishi, K. et al. (1998) Thermal spray quasicrystalline coatings. Part 2: Relationships among processing, phase assemblage and tribological response. In: Proc. of 15th Int. Thermal Spray Conf. (Nice, France, May 25-29, 1998).
4. Sordelet, D.J., Krotz, P.D., Daniel, Jr. R.L. et al. (1995) Microstructure and wear behavior of quasicrystalline ther¬mal sprayed coatings. In: Proc. of 8th Nat. Thermal Spray Conf. (Houston, USA, Sept. 11–15, 1995).
5. Dubois, J.-M., Kang, S.S., Massiani, Y. (1993) Application of quasicrystalline alloys to surface coating of soft metals. J. Non-Crystalline Solids, 153/154, 443–445.
6. Kulu, P. (1988) Wear resistance of powder materials and coatings. Tallinn: Valgus.
7. Klejs, I.P. (1970) Centrifugal accelerator TsUK-3M for de¬termination of relative wear resistance of materials during abrasive erosion. In: Transact. of the Tallinn Polytechn. Inst., Series A.

---

Suggested Citation

Yu.S. Borisov, A.L. Borisova, V.F. Golnik, Z.G. Ipatova (2006) Gas-abrasive wear resistance of thermal spray coatings of Al-Cu-Fe system alloys containing quasi-crystalline phase. The Paton Welding J., 05, 26-29.

---